greasy
blakbearddelite
Yes to AAD..? I had Speedlogix and returned them..
View attachment 61870
View attachment 61872
They make great stuff. Weren’t full market yet when I did mine so I went with Spohn.
follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_requires_accessing_site_using_safari
greasy
blakbearddelite
Yes to AAD..? I had Speedlogix and returned them..
View attachment 61870
View attachment 61872
He's going for that Mad Max vibe. Sweet!nerf bars? nice
EXACTLY.
Not sure how they will weld up to the paper thin body panels, but we are going to give her a go! Wish me luck.
Their customer service is shit.
Paper mache is light!
I mean so is chrome-moly compared to mild steel. But max weight savings engage!
Now that he doesn't work for BMR, he definitely comes off as an asshole, but mostly because people are morons I believe. When he was employed by BMR, he was pretty damn helpful and would share pretty valuable info to the community and would always answer questions. He's who I got the idea of through bolting my rear diff and also pretty sure I used his alignment specs. Will also make sure to dial in the pinion angle when I get a 1 piece driveshaft because of him. I figured with an IRS car, there was no need to set pinion angle or even the proper way to do it. Kelly has made a few posts on the subject due to guys losing aftermarket driveshafts on these cars at high speed.Kelly Aiken doesnt work for them anymore but that guys a clown too.
He's who I got the idea of through bolting my rear diff and also pretty sure I used his alignment specs. Will also make sure to dial in the pinion angle when I get a 1 piece driveshaft because of him. I figured with an IRS car, there was no need to set pinion angle or even the proper way to do it. Kelly has made a few posts on the subject due to guys losing aftermarket driveshafts on these cars at high speed.
Now that he doesn't work for BMR, he definitely comes off as an asshole, but mostly because people are morons I believe. When he was employed by BMR, he was pretty damn helpful and would share pretty valuable info to the community and would always answer questions. He's who I got the idea of through bolting my rear diff and also pretty sure I used his alignment specs. Will also make sure to dial in the pinion angle when I get a 1 piece driveshaft because of him. I figured with an IRS car, there was no need to set pinion angle or even the proper way to do it. Kelly has made a few posts on the subject due to guys losing aftermarket driveshafts on these cars at high speed.
Clown or not, the guy knows his shit and BMR needs to get him back at least to handle customer relations. The Dion guy that replaced him is one step above worthless...
It seems certain companys have vibration issues with the most common being DSS.Are guys experiencing vibration at high speeds with one piece driveshafts on the S550 platform? It is a common problem with the Hellcat guys, curious if it is coming from the same idea.
Please explain the correct way to clock a brand new driveshaft? A properly balanced driveshaft should install in any position and not vibrate.If they are not clocked right yes they vibrate.
I don't recall BMR punting him and I'm pretty sure he left to pursue another career opportunity. If BMR punted him and he was bitter, why does he still use BMR and back their product? Did Kelly insult you for being a dumbass on Facefuck? Because that's what seems to have happened here...lol. Like I said, he acts like a dick now, because he's not paid for customer relations and people on Facebook/internet are complete fucktards. All you have to do is read some of your own posts! hahaIm not going off when he worked with BMR im going off the forums and pages hes on including looking his own FB and a few other Mustang sites.
The guys bitter as fuck BMR punted him because his mouth got him in trouble now he acts like a jackass. If his BMR reputation was good hes thrown that out the window by now.
It seems certain companys have vibration issues with the most common being DSS.
Please explain the correct way to clock a brand new driveshaft? A properly balanced driveshaft should install in any position and not vibrate.
It IS good practice to mark the clocking of the stock driveshaft just in case you need to reinstall, but even that should install in any position and not vibrate.
I don't recall BMR punting him and I'm pretty sure he left to pursue another career opportunity. If BMR punted him and he was bitter, why does he still use BMR and back their product? Did Kelly insult you for being a dumbass on Facefuck? Because that's what seems to have happened here...lol. Like I said, he acts like a dick now, because he's not paid for customer relations and people on Facebook/internet are complete fucktards. All you have to do is read some of your own posts! haha
Man, this guy really hurt your feelings! hahaLol give zero shits what he says just look at his own page too.
Yes people are idiots on all the mustang pages too.
I have never contacted him for anything just come across him on multiple sites.