My grandma rocks her car higher than 3200RPM.
aparently my baby couldnt handle that hahahaha
follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_requires_accessing_site_using_safari
My grandma rocks her car higher than 3200RPM.
i mean come on u know our cars cant handle anything over 2g's lol
but eagle what is ur input on that setup that i stateed above with that short block from that company?
If you're going to spray it w/150+ often then its probably a good cheap option for you. If not, I'd probably stick to an alum block for the weight savings. That's just me.
I had to push it onto the trailer, AND wash the trailer. That = 2 cases of beer since you weren't there.
I had to push it onto the trailer, AND wash the trailer. That = 2 cases of beer since you weren't there.
ALL MOTOR
Engine Displacement: 441
Cylinder Heads: Cartek 5X - L92
Camshaft: Cartek 5X
Valvetrain: Hydraulic
Suspension: Custom
Best ET: 9.59
Best MPH: 138
Weight w/ Driver: 3200 lbs
actually not as bad as I though..... it grenaded because the piston seiezed into the block and shot the rod cap through the oil pan. But Im doing a new motor anyway so I guess every piston could look like this and it wouldnt matter
well that explains the hole in ur oil pan