Now that I have pretty much decided upon keeping the GTO, it is time to start pricing out a cam install. For all those of you that have experience with the LS engines, I am looking for guidance on what I should and should not be doing.
Based upon my previous research, I was considering either the 224R or 228R. I also read a lot of good things about Ed at Flowtech Induction and the custom cams he makes for your application. I am open to any/all suggestions regarding cam selection.
I am also looking for information on what else is required/suggested to accompany a cam install. Pushrods, stall, oil pump, etc.
And what route did everyone take for tuning after the install?
Current status of my car is as follows:
2004 A4 GTO
-JBA Shorty Headers and Catless Mids (Will replace with longtubes)
-Intake
-Speed Inc Base Tune (Can apply towards dyno tune purchase)
Based upon my previous research, I was considering either the 224R or 228R. I also read a lot of good things about Ed at Flowtech Induction and the custom cams he makes for your application. I am open to any/all suggestions regarding cam selection.
I am also looking for information on what else is required/suggested to accompany a cam install. Pushrods, stall, oil pump, etc.
And what route did everyone take for tuning after the install?
Current status of my car is as follows:
2004 A4 GTO
-JBA Shorty Headers and Catless Mids (Will replace with longtubes)
-Intake
-Speed Inc Base Tune (Can apply towards dyno tune purchase)