Ford Official Ford Focus ST Discussion Thread - Page 43

Smokinhot · 08-01-2015, 11:31 AM

Nope, 6spd manual only

Thirdgen89GTA · 08-01-2015, 11:35 AM

Quote:

Originally Posted by TonzKnock-G

Do these come in auto?

Joy stick provided from the factory.

**IDAFC21** · 08-01-2015, 03:04 PM

Screw it. Boomba can ordered. In natural aluminum as well. Should really pop. Paid a couple extra bucks for UPS shipping this time vs usps, cuz the last couple times ive gotten stuff thru usps the boxes were so beat to shit by time I got them. And of course who could forget the time my sound symposer delete was just flat out stolen right out of the box

Screw you usps.

**IDAFC21** · 08-03-2015, 01:10 AM

Is....is this really a question?? I mean....I just...what?

What single mod would make it easier to shift into 2nd gear?

I mean im not gonna knock anyone for wanting to know more about their car...but SOMETIMES......

Thirdgen89GTA · 08-03-2015, 09:12 AM

Quote:

Originally Posted by IDAFC21

Is....is this really a question?? I mean....I just...what?

What single mod would make it easier to shift into 2nd gear?

I mean im not gonna knock anyone for wanting to know more about their car...but SOMETIMES......

Forum of full of newbies and idiots. There are so many who spend money on the most Ricerish of things.

The "crawl" mode conversations both piss me off and have me rolling at the same time. People thinking its some kind of special feature that the ST can idle along in 1st gear without any throttle input. Lulz. All along its just the IAC circuit attempting to keep the engine running.

Then again, the car is technically a Sport Compact and as such tends to attract the ricer crowd. Most recent example is the guy who's "mod" was to eliminate both the muffler and resonator. So his car is still running the tiny bottle necked DP, and the 2" exhaust. But is now loud as hell and no faster. He said "Best $100 I ever spent". Really? Rednecks and Ricers are cut from the same cloth.

Boomba Racing · 08-03-2015, 04:49 PM

Quote:

Originally Posted by IDAFC21

Screw it. Boomba can ordered. In natural aluminum as well. Should really pop. Paid a couple extra bucks for UPS shipping this time vs usps, cuz the last couple times ive gotten stuff thru usps the boxes were so beat to shit by time I got them. And of course who could forget the time my sound symposer delete was just flat out stolen right out of the box

Screw you usps.

Order has been shipped :P, these cars just like pretty much anything DI need a catch can system bad! nothing like a pool of oil floating in your intercooler pipes lol.

**IDAFC21** · 08-03-2015, 07:53 PM

Quote:

Originally Posted by Boomba Racing

Order has been shipped :P,

Yup, got the email, woo thanks!

**IDAFC21** · 08-07-2015, 08:51 PM

Well lookee what just arrived.

This thing is a beautiful piece of work and very well constructed. All the edges smooth and rounded. No corner cut. Cant wait to get this thing in the car. Tho I really wanna try and get it in for the harness recall first, since this can will be sitting right where they need to do their work. Just got my gto semi sorted out this week, changed oil, fixed an oil leak, and flushed out/replaced rear diff fluid, so hopefully next week I can try and get the ST in sometime for the recall work.

Thirdgen89GTA · 08-07-2015, 09:11 PM

Yeah, I can understand the need to sort the cars out. I just ripped the Fan Relay harness out of the TransAm because it needs to be redone.

I tried to hold on for the RS, but the tires on the Focus are just at their limits. I ordered a set of 245/40 Michelin PSS tires for the ST. The stock tires are just too far gone to be safe on anymore.

This follows up considering I just spent about $820 with Founders Performance for the TransAm. I bought their TQ Arm, LCA relocation brackets, and Strut mounts with spherical bearings, and a set of Vogtland linear rate lowering springs. I got tired of the positive camber from just how high the car sits in front. Not sure when I'll get it all on the car, but the rear stuff shouldn't take too long.

Pewter-Camaro · 08-07-2015, 09:15 PM

Quote:

Originally Posted by Boomba Racing

Order has been shipped :P, these cars just like pretty much anything DI need a catch can system bad! nothing like a pool of oil floating in your intercooler pipes lol.

Quote:

Originally Posted by IDAFC21

Well lookee what just arrived.

This thing is a beautiful piece of work and very well constructed. All the edges smooth and rounded. No corner cut. Cant wait to get this thing in the car. Tho I really wanna try and get it in for the harness recall first, since this can will be sitting right where they need to do their work. Just got my gto semi sorted out this week, changed oil, fixed an oil leak, and flushed out/replaced rear diff fluid, so hopefully next week I can try and get the ST in sometime for the recall work.

Very nice!! I still need a catch can for the EBMustang. I've been eyeing it since boomba released theirs recently. I still want to get a good tune on it though.. uggh.. 1st world decisions are soo hard.. lol. good lookin catch can boomba!

Boomba Racing · 08-12-2015, 12:04 PM

Quote:

Originally Posted by Pewter-Camaro

Very nice!! I still need a catch can for the EBMustang. I've been eyeing it since boomba released theirs recently. I still want to get a good tune on it though.. uggh.. 1st world decisions are soo hard.. lol. good lookin catch can boomba!

A good tune goes a long way, throwing a bunch of bolt-ons with stock ECU restrictions on modern cars doesn't do much at all, but if your planning on getting more bolt ons/mods maybe collect them first and get a good proper tune with everything installed on the car.

***The Beast*** · 08-12-2015, 12:26 PM

Just got in a black fiesta st

Thirdgen89GTA · 08-12-2015, 01:53 PM

Quote:

Originally Posted by The Beast

Just got in a black fiesta st

So when does the RS come in. And can your fellow TCG's get MSRP?

Thirdgen89GTA · 08-12-2015, 06:28 PM

Got the Michelin Pilot SuperSports on the car today.

Initial impressions? I do not like them and would not buy them again.

Even at 38psi, their sidewall is softer than the F1s and it takes the fun out of the car. They also wander quite a bit more than the F1s did.

Traction is good, but at the expense of feedback.

Unless things change as they wear in I can't see myself buying a set of these again.

**IDAFC21** · 08-12-2015, 08:18 PM

Hm. Well thats good to know.

Just got my st scheduled to go in friday morning for the wiring harness recall. Heres to hoping it doesnt come back more screwed up than when i brought it in

If they can get it done friday I may yet be able to install my catch can this weekend. When its 112 out.

***The Beast*** · 08-12-2015, 10:35 PM

Quote:

Originally Posted by Thirdgen89GTA

So when does the RS come in. And can your fellow TCG's get MSRP?

I don't see why not

Boomba Racing · 08-13-2015, 08:46 AM

Quote:

Originally Posted by IDAFC21

Hm. Well thats good to know.

Just got my st scheduled to go in friday morning for the wiring harness recall. Heres to hoping it doesnt come back more screwed up than when i brought it in

If they can get it done friday I may yet be able to install my catch can this weekend. When its 112 out.

Make sure you inspect the quality of the work that has been done to your car, we have seen some horrific electrical tape work not even properly taped.

wombat · 08-13-2015, 08:47 AM

Quote:

Originally Posted by Boomba Racing

Make sure you inspect the quality of the work that has been done to your car, we have seen some horrific electrical tape work not even properly taped.

Where would one look for that? I got mine done and I still have a VERY SLIGHT shaky idle.

Also...

...Would you guys be willing to put some goodies on my car this afternoon?

SirMarco · 08-13-2015, 08:48 AM

Get the M/T Street Comps.........

Boomba Racing · 08-13-2015, 11:05 AM

Quote:

Originally Posted by wombat

Where would one look for that? I got mine done and I still have a VERY SLIGHT shaky idle.

Look for electrical tape bundle of wires underneath where the sound symposer coming off the manifold would be.

Also...

...Would you guys be willing to put some goodies on my car this afternoon?

What do you need installed :P

wombat · 08-13-2015, 11:06 AM

Shoot me a PM on pricing for your short throw shifter and bushings OTD installed price...I may swing by after work today.

BS ISF · 08-13-2015, 11:14 AM

Quote:

Originally Posted by Thirdgen89GTA

Got the Michelin Pilot SuperSports on the car today.

Initial impressions? I do not like them and would not buy them again.

Even at 38psi, their sidewall is softer than the F1s and it takes the fun out of the car. They also wander quite a bit more than the F1s did.

Traction is good, but at the expense of feedback.

Unless things change as they wear in I can't see myself buying a set of these again.

Wait until you get some miles on them. This is a very familiar initial impression on a lot of different platforms. They will get better.

Boomba Racing · 08-13-2015, 11:14 AM

Quote:

Originally Posted by wombat

Shoot me a PM on pricing for your short throw shifter and bushings OTD installed price...I may swing by after work today.

PM sent!

Thirdgen89GTA · 08-13-2015, 06:24 PM

Quote:

Originally Posted by BS ISF

Wait until you get some miles on them. This is a very familiar initial impression on a lot of different platforms. They will get better.

I hope they do. One of the things I loved about the ST was just how fast it responded to steering input.

The ST responded so fast to turn in, and required so little steering wheel input that it made it feel like a very nervous car to drive. It took a month to get used to the steering to the point that I wasn't wandering around with the slightest change in steering angle.

**IDAFC21** · 08-13-2015, 08:42 PM

Quote:

Originally Posted by Boomba Racing

Make sure you inspect the quality of the work that has been done to your car, we have seen some horrific electrical tape work not even properly taped.

Oh believe me Im popping the hood before I even leave the lot.

08-01-2015, 11:31 AM	#1051
Smokinhot 3-man rules!!!! Join Date: Jul 2007 Location: Lansing, IL Posts: 13,439 Casino cash: $31255829 3.17 per day	Nope, 6spd manual only __________________ '04 Chevy Silverado ECSB - stock go fast parts.... '12 Hyundai Accent SE - Daily Driver 79 Camaro - WORK IN PROGRESS.....

08-01-2015, 03:04 PM	#1053
IDAFC21 WOW. Join Date: May 2007 Location: Avondale, AZ Posts: 38,124 Casino cash: $101529529 8.89 per day	Screw it. Boomba can ordered. In natural aluminum as well. Should really pop. Paid a couple extra bucks for UPS shipping this time vs usps, cuz the last couple times ive gotten stuff thru usps the boxes were so beat to shit by time I got them. And of course who could forget the time my sound symposer delete was just flat out stolen right out of the box Screw you usps. Smokinhot likes this. __________________ 2014 ///M235i_____________________________________________ _____2004 Monaro

08-07-2015, 08:51 PM	#1058
IDAFC21 WOW. Join Date: May 2007 Location: Avondale, AZ Posts: 38,124 Casino cash: $101529529 8.89 per day	Well lookee what just arrived. This thing is a beautiful piece of work and very well constructed. All the edges smooth and rounded. No corner cut. Cant wait to get this thing in the car. Tho I really wanna try and get it in for the harness recall first, since this can will be sitting right where they need to do their work. Just got my gto semi sorted out this week, changed oil, fixed an oil leak, and flushed out/replaced rear diff fluid, so hopefully next week I can try and get the ST in sometime for the recall work. Pewter-Camaro likes this.

08-12-2015, 12:26 PM	#1062
*The Beast* Forum Sponsor Join Date: May 2004 Posts: 13,337 Casino cash: $24675800 2.48 per day	Just got in a black fiesta st __________________ send me a pm if you are wanting to buy a new ford or a pre driven vehicle

08-13-2015, 08:48 AM	#1069
SirMarco of Pingree Grove Join Date: May 2009 Location: Pingree Grove Posts: 11,453 Casino cash: $362000 3.21 per day	Get the M/T Street Comps......... __________________ 2008 Harley Davidson Street Glide: Bagger Status Day Maker Headlight / 12" Paul Yaffe Bagger Bars "BILLY" 2016 RAM 1500 HEMI: The new DD status

08-03-2015, 01:10 AM	#1054
IDAFC21 WOW. Join Date: May 2007 Location: Avondale, AZ Posts: 38,124 Casino cash: $101529529 8.89 per day	Is....is this really a question?? I mean....I just...what? What single mod would make it easier to shift into 2nd gear? I mean im not gonna knock anyone for wanting to know more about their car...but SOMETIMES......

08-07-2015, 09:11 PM	#1059
Thirdgen89GTA Aka "That Focus RS Guy" Join Date: Sep 2010 Location: Buffalo Grove Posts: 9,521 Casino cash: $90143300 3.10 per day	Yeah, I can understand the need to sort the cars out. I just ripped the Fan Relay harness out of the TransAm because it needs to be redone. I tried to hold on for the RS, but the tires on the Focus are just at their limits. I ordered a set of 245/40 Michelin PSS tires for the ST. The stock tires are just too far gone to be safe on anymore. This follows up considering I just spent about $820 with Founders Performance for the TransAm. I bought their TQ Arm, LCA relocation brackets, and Strut mounts with spherical bearings, and a set of Vogtland linear rate lowering springs. I got tired of the positive camber from just how high the car sits in front. Not sure when I'll get it all on the car, but the rear stuff shouldn't take too long.

08-12-2015, 06:28 PM	#1064
Thirdgen89GTA Aka "That Focus RS Guy" Join Date: Sep 2010 Location: Buffalo Grove Posts: 9,521 Casino cash: $90143300 3.10 per day	Got the Michelin Pilot SuperSports on the car today. Initial impressions? I do not like them and would not buy them again. Even at 38psi, their sidewall is softer than the F1s and it takes the fun out of the car. They also wander quite a bit more than the F1s did. Traction is good, but at the expense of feedback. Unless things change as they wear in I can't see myself buying a set of these again.

08-12-2015, 08:18 PM	#1065
IDAFC21 WOW. Join Date: May 2007 Location: Avondale, AZ Posts: 38,124 Casino cash: $101529529 8.89 per day	Hm. Well thats good to know. Just got my st scheduled to go in friday morning for the wiring harness recall. Heres to hoping it doesnt come back more screwed up than when i brought it in If they can get it done friday I may yet be able to install my catch can this weekend. When its 112 out.

08-13-2015, 11:06 AM	#1071
wombat Join Date: Sep 2007 Location: Wood Dale, IL Posts: 12,349 Casino cash: $3807243 2.97 per day	Shoot me a PM on pricing for your short throw shifter and bushings OTD installed price...I may swing by after work today. IDAFC21 and Primalzer like this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode