check the points gap
Ok but, do I just start tearing covers off this thing until I find the points? :eek3dance:
follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_requires_accessing_site_using_safari
check the points gap
Put wheels on it and go for a ride in sand
that's the newer Tecumseh logo and side covers so that thing is likely electronic
it should be a electronic "module" style ignition.
check the wire that grounds that to kill the spark. if its shorted to ground somehwere it would not make spark.
otherwise your flywheel mihgt have corrosion where the coil or module mounts.. clean both with wire wheel, re assemble with business card worth of gap.
obviously also check resistance in the coil too... it might have just shit the bed.
Well poop. Guess I'll go tear this thing apart after my next meeting.
[MENTION=945]daturbosix[/MENTION] You're saying the wire to the module, should NOT be grounded, or that it should be?