Snow blower won't start - suggestions?

daturbosix

HNIC @ GoodFellas Garage
TCG Sponsor
Mar 2, 2008
16,368
15,196
Aurora
Real Name
Jeff
it should be a electronic "module" style ignition.

check the wire that grounds that to kill the spark. if its shorted to ground somehwere it would not make spark.

otherwise your flywheel mihgt have corrosion where the coil or module mounts.. clean both with wire wheel, re assemble with business card worth of gap.

obviously also check resistance in the coil too... it might have just shit the bed.
 

Eagle

Nemo me impune lacessit
Moderator
TCG Premium
Mar 1, 2008
63,904
4,732
Woodsticks, IL
it should be a electronic "module" style ignition.

check the wire that grounds that to kill the spark. if its shorted to ground somehwere it would not make spark.

otherwise your flywheel mihgt have corrosion where the coil or module mounts.. clean both with wire wheel, re assemble with business card worth of gap.

obviously also check resistance in the coil too... it might have just shit the bed.

Well poop. Guess I'll go tear this thing apart after my next meeting.
[MENTION=945]daturbosix[/MENTION] You're saying the wire to the module, should NOT be grounded, or that it should be?
 

daturbosix

HNIC @ GoodFellas Garage
TCG Sponsor
Mar 2, 2008
16,368
15,196
Aurora
Real Name
Jeff
7e2292e935d9039f4783cd55ac59a940.jpg


Scrap blower, buy this from me
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info