So I took the KB apart Im doing some powdercoating, and the lower intake was pretty much full of oil. I have a catch can from LFP it works, but it seems not good enough. I have oil in the intercooler fins too. This is and can not be good, especially in detonation cases.
Below are some pics, of the intake, look at all the oil that came from the pcv hose! So I was thinking of just eliminating the hose all together, and putting a breather on the valve cover, and plugging brass fitting on the lower intake.....What do you guys think I should do? The other option is get another catch can but will this be 100% full proof?
Below are some pics, of the intake, look at all the oil that came from the pcv hose! So I was thinking of just eliminating the hose all together, and putting a breather on the valve cover, and plugging brass fitting on the lower intake.....What do you guys think I should do? The other option is get another catch can but will this be 100% full proof?