follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_requires_accessing_site_using_safari
maybe its close to 400hp on the 250shot
This car was professionally built by a guy by the name of Michael Cerra in 2003. The whole build cost me $ 42,000 dollars that's the motor,tranny,computer,exhaust,sup,drive axels,ect.......................... I know that you have never heard of a car with a 3.1 V-6 that makes the kind of numbers that this car has mad because this is the only one of it's kind. I have paperwork form GM stating that this is a 1 of 1 noone has ever built a 3.1 400 horsepower V-6 engine since the motor was 1st introduced. I'm known around here as the V-6 King. I own my own company and that's what we do. I've got a 1999 Chrysler 300 M that is twinn turboed and rear wheel drive that puts out 875 horsepower at the crank,and 825ft lbs of torque. So it's true no joking around here. I have all of the blue prints to this engine,and I will go and run the car at the drag strip today to prove my point to you and I will also go to the dyno to get a fresh tune on it and put those numbers up for you and then we will go from there. I don't drag race anymore and haven't in a couple of years and don't have any idea what the car will run now but I can tell you this whatever it runs you will be impressed. My name is Montrece.
I'm interested in this car of yours. I've been around 3.1's for the last 7 years and have never seen one with these numbers. Any time slips or pictures of proof? Thanks. Where at in NW IL? I'm about 45 minutes south west of Chicago.
Yeah he's full of shit. I found this last week and emailed him, my initial email is at the bottom. What a crock.
I know that you have never heard of a car with a 3.1 V-6 that makes the kind of numbers that this car has made because this is the only one of it's kind. I have paperwork from GM stating that this is a 1 of 1 noone has ever built a 3.1 400 horsepower V-6 engine since the motor was 1st introduced.
i need to send my motor to that shop. if he can do that w/ a 3.1L, he should be able to get my 5.7L up to around 1200whp ALL MOTOR, and only for a mere 80 grand!
HaHaHaHaHa, a 3.8L crank in a 3.1L engine????
Umm, Sorry but a crankshaft for a 3.8L will not physically fit in a 3.1L engine.
Lunati cam?? Sorry, But there are no aftermarket cams for a 60* V-6 that are DIS compatable. Lunati only makes one cam for the 60* V-6's.
GMPP does not make perfromance heads for the 3.1L.
Yeah it looks like a show car from the pics too.
:bsflag: :bsflag: :bsflag:
GM Performance heads?
I can't imagine GMPP ever made heads for a 3.1...but I could be wrong