Been collecting parts all winter for this and procrastinated until spring to even start the build. I normally only post on fb, instagram, and the gto forum but figured some of you on tcg might enjoy watching me slop together a bunch of china junk and ace hardware items that hopefully in the end slightly resemble a twin turbo'd gto.
Build consists of:
SBE ls1 with 110k+ miles, head studs and cam only. Using same cam I've used with the last 2 turbo setups. HPE S-CAM 238/242 .605 112lsa
Edelbrock pro flo intake
Same th400 I had already, good sprag, TCI RMVB, circle D 3500 converter
Rebuilt oem rear end with spool and 3.07 gear
X2 turbosmart 40mm gates
tial BOV
Cxracing 2 in 1 out FMIC
and last of all is 2 ching chong 72mm turbos. They are 7265s with a T4 .68 a/r exhaust side. Got them from vsracing.
This is my 3rd turbo setup. Sold the last one to a local buddy.
It was a tc7875 with tial wg and bov.everything else was china/ebay stuff. On 12 psi and 15* it made 640whp through the th400.
Ran 10.38 at 135mph with a 1.70 60ft
How the last one looked
Bumper exit DP
New pile of parts
New snails
Billet backing plates on the 300 dollar turbo
Got them mounted up and one downpipe made.
Dat penetration doe! Getting better with the metal caulk gun
Build consists of:
SBE ls1 with 110k+ miles, head studs and cam only. Using same cam I've used with the last 2 turbo setups. HPE S-CAM 238/242 .605 112lsa
Edelbrock pro flo intake
Same th400 I had already, good sprag, TCI RMVB, circle D 3500 converter
Rebuilt oem rear end with spool and 3.07 gear
X2 turbosmart 40mm gates
tial BOV
Cxracing 2 in 1 out FMIC
and last of all is 2 ching chong 72mm turbos. They are 7265s with a T4 .68 a/r exhaust side. Got them from vsracing.
This is my 3rd turbo setup. Sold the last one to a local buddy.
It was a tc7875 with tial wg and bov.everything else was china/ebay stuff. On 12 psi and 15* it made 640whp through the th400.
Ran 10.38 at 135mph with a 1.70 60ft
How the last one looked
Bumper exit DP
New pile of parts
New snails
Billet backing plates on the 300 dollar turbo
Got them mounted up and one downpipe made.
Dat penetration doe! Getting better with the metal caulk gun