The adhesive strip from morimoto was sooo easy to apply and it was nice and sticky. Once in place I placed the lens and pushed it until it got the tabs in. I placed the headlamp in the oven as according to their instructions, but because the housing had all the wiring and the rubber/silicon seal I took them immediately after one minute. I noticed that the wires started to move because of the soft material. So what I did I heated the adhesive using the heat gun and pressing. It worked alright!!
Then I sealed the wiring plug. Hopefully I won't be getting any moist...
Then I sealed the wiring plug. Hopefully I won't be getting any moist...