Install basic boltons myself or pay shop

[Unoid]

you bought the one from the ford dealer over there,paul heuring? the one the guy traded in on a harley truck? .... i was looking at the mineral gray they used to have. I would of bought it cause the mileage was so low but the interior looked like a woman owned it and put makeup on in it and used hairspray. shit was all sticky, interior had makeup marks on it. Arm rests looked like she used that self tanner shit and it rubbed off onto them.

heres pics of the one i have in this link.... i go through hobart alot when i take the gf to school, i also frequent the paintball store...
http://www.chicagosvt.com/forums/showthread.php3?t=27011

Thats the one. Couldn't tell if its ever been modded. I know the tires have been through a lot of burnouts and the right headlight is angled up higher (likely taken out for track)

Where do you live?

 

[Unoid]

Im in Schererville minutes away from you, Ill help you out when youre ready. Let me know. But if you are changing your blower pulley, I highly reccomend you tune the car right away if this is your daily driver. Otherwise dont even think of getting into boost. :blowingup

And do you have a pulley puller? If not I can borrow one. Let me know. Dan

I saw a white coupe with catless midpipe running around 73rd downtown sherreville. That yours?

I may take you up on the offer or someone else, Everyone is so helpful

Still deciding what to do for tune before I put the goodies on.

 

[FuelSlut]

I saw a white coupe with catless midpipe running around 73rd downtown sherreville. That yours?

I may take you up on the offer or someone else, Everyone is so helpful

Still deciding what to do for tune before I put the goodies on.

No Im the silver one w Kurgan stickers on the 1/4 glass. You usually wont see it now untill the weather breaks at least its in the garage. I have seen that same car around town as well, I dont think he is a member on here.

Well anyway let me know. Dan

 

[Unoid]

Got my appoint with Kurgan march 25th.
RareSVT is kind enough to let me barrow his pulley tool!, And it seems fuelslut will be able to help me with it.
Things are looking great.

Can't wait.

 

[Unoid]

Operation to get the pulley on worked. Stoopid me I had a 74" pulley, which was too short for my 2.93 and aux idler so took the idler off and its tight with tensioner.

Now I just gotta wait until next tuesday for a tune. = no boost!

 

[FuelSlut]

Operation to get the pulley on worked. Stoopid me I had a 74" pulley, which was too short for my 2.93 and aux idler so took the idler off and its tight with tensioner.

Now I just gotta wait until next tuesday for a tune. = no boost!

Hey Im free all weekend so when you r ready, let me know. I think you have my number.

 

[Unoid]

I had my best friend help with the install Fuelslut. I appreciate your offer to help, but Now you can enjoy Easter w/o me bothering you

Question: Is it normal for the engine to make a slight whirring/belt noise now?
Guess the whirring is normal for gatorback

 

[FuelSlut]

I had my best friend help with the install Fuelslut. I appreciate your offer to help, but Now you can enjoy Easter w/o me bothering you

Question: Is it normal for the engine to make a slight whirring/belt noise now?
Guess the whirring is normal for gatorback

yup if you run the gatorback belt, you will get a slight whistle sound. and with a smaller pulley you will notice your eaton will get 3 times as loud. enjoy glad that you got it all buttoned up. Happy Easter.

Also IMO the gates belts are the best to run they wont slip as much, so you might want to consider that in the future.

 

[Unoid]

yup if you run the gatorback belt, you will get a slight whistle sound. and with a smaller pulley you will notice your eaton will get 3 times as loud. enjoy glad that you got it all buttoned up. Happy Easter.

Also IMO the gates belts are the best to run they wont slip as much, so you might want to consider that in the future.

Sounds good I'll order one in 74.5" My 74" was perfect fit for Just the 2.93 my metco 100mm aux idler required too much so i took it off.

maybe 75" even?