• Hi Guest, welcome to TCG 2.0. Please refer to the FAQ in User Support before you do anything else. It will make the transition MUCH easier.

    IF YOU ARE SEEING AN "OOPS" ERROR PAGE, IT IS LIKELY BECAUSE YOUR BROWSER HAS NOT UPDATED YOUR CACHE. YOU CAN EITHER CLICK FORUMS AT THE TOP LEFT OR VISIT THECHICAGOGARAGE.COM AND BOOKMARK THAT. - Love, Mook

Help setting up an 8.8

taws697

Well-known member
Joined
Sep 11, 2015
Messages
61
Reaction score
0
Location
West Chicago, IL
Hey guys, I'm rebuilding the 8.8 I have in my fourth gen. F-body. First rearend I've done. I temporarily installed the pinion and pre-loaded it. Installed the carrier and set my backlash to .010". This is the wear pattern I'm getting. I've tried to compare it to the charts I've found and the coast and drive side seem to contradict each other. Not sure whether to add or remove pinion shims. Or maybe leave it alone? Any feedback welcome. Thanks
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top Bottom