• Hi Guest, welcome to TCG 2.0. Please refer to the FAQ in User Support before you do anything else. It will make the transition MUCH easier.

    IF YOU ARE SEEING AN "OOPS" ERROR PAGE, IT IS LIKELY BECAUSE YOUR BROWSER HAS NOT UPDATED YOUR CACHE. YOU CAN EITHER CLICK FORUMS AT THE TOP LEFT OR VISIT THECHICAGOGARAGE.COM AND BOOKMARK THAT. - Love, Mook

Byron still on?

I

imported_Ron Vogel

Guest
Just wanted to check. My Dad and I will be there when they open. Hopefully I talk him into bringing his TA. I will have Auto tap with if anyone needs a scan. SATURDAY
 

BLK00GTP

Well-known member
Joined
Jan 20, 2009
Messages
310
Reaction score
0
Location
Schaumburg
What time do they open. Ill be there for sure..I'd like to Atap to. If you could bring the software i want to load it on my new dell laptop...I want to mess around with it...
 
I

imported_Ron Vogel

Guest
They open around 9am. I like to get there early for cool down, they don't usually start running until 10-10:30am.
 

J.E.T.

Well-known member
Joined
Nov 10, 2008
Messages
1,319
Reaction score
0
I'll be going there just to make a couple of runs.

Here's the temp today: 38°F
Cloudy
Feels Like 31°F

UV Index: 0 Minimal
Dew Point: 38°F
Humidity: 100%
Visibility: 5.0 miles
Pressure: 29.99 inches and falling
Wind: From the South Southwest at 9 mph

See you there Ron and others!

J.E.T.
'97 Red GTP
 
I

imported_Ron Vogel

Guest
It's a little damp out, but I think it'll dry out by the time they start running so I'm gonna chance it.
 

jk99gtp

Well-known member
Joined
Nov 15, 2008
Messages
851
Reaction score
0
Damn I wanted to go to this!! I thought ilgpc had died or something, been looking for this site for a week now...oh well, I will hit some track dates next year I guess..

I actually had a change of plans with what I wanted for a modular pulley system and just went ahead and purchased a Magnuson snout..

I went ahead and did the install last night with a buddy of mine. It was sort of a pain because when we were doing the install part of the Sc/Intake gasket ripped off (It was a very small portion , the part that just sits under the snout, there is still gasket poking out of the SC/Intake and I have no vacuum leaks after we put everything back together)...I think we might've used a tad too much sealant to reseal the snout to the rotor piece..either way everything seems pretty normal (no SC noise and car functions totally fine, boost comes on very nicely also)..It looks like I've gained some boost with the Magnuson on there, I peak at around 11psi now (Instead of 10.5 when I had the press-on, maybe belt slippage? When I took the old Gatorback belt off it looked usable again)..Talk about ready to kill someone, putting back on the accessory belt was a PITA!!!! It took me like 45 min to finally figure out how to get that sucker on, at one time I actually thought autzone had sold me the wrong size Gatorback belt (915 is the last three numbers of the accessory belt size that they sold me)...

Im going to keep my old snout just as a replacement. Does anyone know if there are any recommended machine shops out there that can get my 3.4" press-on pulley off with a machine...

Today Im going to fix my dimming HUD..wish me luck ppl!!

Thanks guys!!

Joel
'99 GTP

P.S.
ThaLord,

I dont know if you found an ISP yet for hosting for ilgpc, but I have a very very good friend who does webhosting/co-location/game hosting/email/etc. I can almost guarantee that I can get you very good pricing for hosting ilgpc on his servers. His servers are all Linux based , so I am not sure how comfortable you are with working with Linux...Anyways, shoot me a PM if you are interested and let me know a range you were currently getting offers from other hosting sites, and I can email him and see what he can do for you. If you arent interested and have found hosting, then I apologize for bothering you. Just want to see ILGPC get back up and runnin again!!
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top Bottom