Quest for MO PAH & Handling!!!!! My Cobra Build **UPDATE** January 4, 2016 (Page 16)
FULL BUILD DETAILS START ON PAGE 5 OF THREAD
I started embarking on a journey late last year to do a blower build on the Cobra and here is the end result! I had a completed total build thread, but I ended up accidentally deleting it. I will have that thread tied into this one when we recover it. I put together this kit myself and built it in my garage over the past couple of months. The only things I did not touch were the welding and the tune. Here is the mod list.....
Paxton Novi 2000 Kit w/ 3.5" Pulley
- Anderson Power Pipe
- High Flow Performance 300 LPH Fuel Pump
- 60 lbs. Siemens Deka Injectors
- SCT BA5000 Slot Style MAF (3" Tube/Blow Through & IAT Wired into MAF)
- 31" x 12" x 4" Intercooler with 3" Piping
- Vortech Mini Race Bypass Valve (Vented to Atmosphere)
- NGK TR6 gapped at 0.018"
- Screamin' Demon Coil Packs
- IMRC's Deleted
- EGR Deleted
- SAI (Secondary Air Injection) Deleted
- BBK Longtubes w/ Off Road H-Pipe and Flowmaster Catback Dumped
- 4.10 Gears
- 180 Degree Thermostat
I have to give HUGE thanks to:
- Mook, Eagle, Bru, Chim Richalds, ZXMustang, E, and utryd2 for all of their support and help along the way!
- Nick and Speed Inc. for doing awesome welding work once again! @Nick@SpeedInc [MENTION=3559]School Boy[/MENTION]
- Hans at Dean's Performance for helping out with the car and providing his dyno. [MENTION=3093]hans@deansperformance[/MENTION]
- Bob at Kurgan Motorsports for putting a badass tune on my ride remotely from almost 1,000 miles away!
FULL BUILD DETAILS START ON PAGE 5 OF THREAD
I started embarking on a journey late last year to do a blower build on the Cobra and here is the end result! I had a completed total build thread, but I ended up accidentally deleting it. I will have that thread tied into this one when we recover it. I put together this kit myself and built it in my garage over the past couple of months. The only things I did not touch were the welding and the tune. Here is the mod list.....
Paxton Novi 2000 Kit w/ 3.5" Pulley
- Anderson Power Pipe
- High Flow Performance 300 LPH Fuel Pump
- 60 lbs. Siemens Deka Injectors
- SCT BA5000 Slot Style MAF (3" Tube/Blow Through & IAT Wired into MAF)
- 31" x 12" x 4" Intercooler with 3" Piping
- Vortech Mini Race Bypass Valve (Vented to Atmosphere)
- NGK TR6 gapped at 0.018"
- Screamin' Demon Coil Packs
- IMRC's Deleted
- EGR Deleted
- SAI (Secondary Air Injection) Deleted
- BBK Longtubes w/ Off Road H-Pipe and Flowmaster Catback Dumped
- 4.10 Gears
- 180 Degree Thermostat
I have to give HUGE thanks to:
- Mook, Eagle, Bru, Chim Richalds, ZXMustang, E, and utryd2 for all of their support and help along the way!
- Nick and Speed Inc. for doing awesome welding work once again! @Nick@SpeedInc [MENTION=3559]School Boy[/MENTION]
- Hans at Dean's Performance for helping out with the car and providing his dyno. [MENTION=3093]hans@deansperformance[/MENTION]
- Bob at Kurgan Motorsports for putting a badass tune on my ride remotely from almost 1,000 miles away!