91' LX Hatch
- Thread starter Mr. SBF
- Start date
Got the alignment done today.
Seeing that picture on the alignment rack makes me want really want to buy the beadlocks and new fronts that I want!
hopefully by fall I'll be able get the new shoes as well as upgrade the front brakes finally to 5lug.
Next mods will be a anti-roll bar, the nitrous kit and a vacuum pump next month.
Seeing that picture on the alignment rack makes me want really want to buy the beadlocks and new fronts that I want!
hopefully by fall I'll be able get the new shoes as well as upgrade the front brakes finally to 5lug. Next mods will be a anti-roll bar, the nitrous kit and a vacuum pump next month.
Attachments
Scored these Weld Rts's today and while there not the baller 17's 2.0's I really want, I can't complain I got a great deal! Got them while picking up a nice caged Fox Gt shell I found on craigslist
Now I have 3 91 foxbody's... though we'll be getting rid of the black gt. I smoothed engine bay and working on finishing the mini tub.
Now I have 3 91 foxbody's... though we'll be getting rid of the black gt. I smoothed engine bay and working on finishing the mini tub.
Attachments
Got the alignment done today.
Seeing that picture on the alignment rack makes me want really want to buy the beadlocks and new fronts that I want!
Next mods will be a anti-roll bar, the nitrous kit and a vacuum pump next month.
Have those Welds on my car. Love them wheels!
Lol getting rid of the black Gt as soon as I finish up the mini tub and get it back to a roller. I welded and smoothed the engine bay on that one a few months ago which took around a 100hrs and now I get to do it all over again on the Red Gt :roflwtf: Then once that one is gone I will probrably start the hunt for a notchback for the street.
Attachments
Went to the track today to make sure the Gremlin was gone which it is! and also to get some baseline runs on 28's the way it sits now to compare the 26's which will be going on tomorrow.:toast: hoping for 4mph gains over the 28's.
Video of a few passes! I picked up damn near 3 tenths since last year with the weight savings though the cage obviously was a good bit added back in. It has more in it for sure with some timing, jetting up and leaving even harder once the anti roll bar is in!
and also to get some baseline runs on 28's the way it sits now to compare the 26's which will be going on tomorrow.:toast: hoping for 4mph gains over the 28's.Video of a few passes! I picked up damn near 3 tenths since last year with the weight savings though the cage obviously was a good bit added back in. It has more in it for sure with some timing, jetting up and leaving even harder once the anti roll bar is in!
Yes it does lol first pass looked like I was going to take out the tree... But the Anti roll bar will fix that, Got the 26's mounted today. It sit's higher than I like it to but oh well.
Attachments
I ordered the UPR Pro series chromoly anti roll bar and UPR heavy duty torque box upper and lower reinforcement kit last night!
What are the Kots Jr cars running? It says no aftermarket anti roll bars? I may enter the fall event once I install the plate kit and get a vacuum pump!
I ordered the UPR Pro series chromoly anti roll bar and UPR heavy duty torque box upper and lower reinforcement kit last night!
What are the Kots Jr cars running? It says no aftermarket anti roll bars? I may enter the fall event once I install the plate kit and get a vacuum pump!
If I had to take a guess there are a few that have to be damn close to low 9s on the no prep track
Has to be a stock style sway bar using oem style links. So basically u can't buy a umi or bmr drag bar and use the rod end style links supplied with it. On fbodies I figured out a way to adapt the bmr drag bar with stock style links and the car launch straight as if it has an anti rollbar on it. The mustangs I'm not sure what there exactly doing..
Nice that's around where I was thinking they are sitting in Jr's also... I think I can be a decent contender then on the spray. I am going for 9.99 on this little 302 n/a motor this year...
I'll have to talk to Curtis Martin on the roll bar deal for stangs in Jr trim. Just want to give it a try...Attachments
Last edited:
Dude that car is MOVING! Looks and sounds awesome!
I also fixed your video embeds for you.
Thanks man, I wish that I still had the full 3" stainless Bassani exhaust that I was running last year, it sounded ridiculous!:toast:
Thread Info
-
Created -
149Replies
-
7KViews
-
Participants list
