New work machine #isitforsaleyet

[Outlaw]

Dropped the welder in last night. Worked out great, only complaint is the manual boom adjustments. Involved setting it down, re-adjusting and picking three times to get it situated, but at full reach off the corner of the truck it still picked it right up off the trailer. Air bags kept the truck pretty well level as well. Driver side is sitting about an inch lower than the passenger side currently, probably put my compressor on the passenger side to even it out and then adjust air pressure to make up the rest.

 

[Yaj Yak]

your neighbors probably think you sell the drugs

 

[Outlaw]

IDK what they think but I'm sure it's not all that positive

 

[Yaj Yak]

when i bought my house i only had my tinted AF gtp and then proceeded to acquire random cars monthly.

they thought i was up to stuff.

 

[Chester Copperpot]

Pretty sure my neighbors also think the same.

 

[Yaj Yak]

oh yeah, your house for sure.

 

[EmersonHart13]

I wish you were my neighbor

 

[Chester Copperpot]

oh wait it's emerson.

 

[Outlaw]

I think they think I sell landscape and golf course maintenance equipment because there was a sandtrap rake and one of these in the driveway last week, now a few new tractors and a wood chipper.

 

[Outlaw]

Currently searching for tool drawers. I think this truck is going to get out of hand pretty quick.

 

[Outlaw]

And another random annoyance, I just replaced the sway bar bushings and end links, after a day or so of driving the passenger side sway bar bushing (that mounts sway bar to front axle) works its way out of the strap. Bolts are good and tight, bushing seats correctly in between the strap... Any ideas [MENTION=7923]CTC DEEZUL[/MENTION]? Any sort of grease/lube I should put on there?

 

[DEEZUZ]

Should.be dry as far as I know. Track bar might be off, is front end square? Sway bar bent?

 

[Outlaw]

Front end is square, sway bar didn't appear to be bent but I'll get under there and look closer. Old one was in place when I originally removed them so I don't think it's a persistent issue. I haven't had time to really go over the truck yet, I just noticed the end links were bad when I bought it so I threw them on with the bushings on the ground the day I bought it. I'm going to exhaust on a lift over by my friends shop so I'll be able to take a better look then. Was curious if you'd seen that before on super duty trucks.

 

[Outlaw]

I was going to repaint the blue rack and side rails but it matches the welder so that's the end of that lol.

 

[Outlaw]

Intake, tuner and 4" turbo back are arriving today :dancingnaughty: Just rolled 384,000 miles I'd say it's perfect time to sendit. I've been daily driving it because my dad has my Tahoe while I'm doing work on his car. Got 17 MPG out of my last tank hand calculated. Not bad at all considering the weight of the truck with the welder, tools, gate, etc...

Got keys for the boxes too, so, I've started putting some tools in it. Need to fill a few holes on one of the boxes from where a top box was bolted through before I put anything water sensitive inside though...

Also, put a new winch on the crane, relay promptly shit the bed so a new one is on the way from not harbor freight lol.

 

[Outlaw]

Just gonna leave this here...

 

[Eagle]

:ballin:

 

[Outlaw]

I need to see how they look on the 6.7 because I'm gonna be a cheap fuck and just trade them back and fourth between trucks lol. They're 20x10's so IDK if that's going to be enough wheel for the 6.7 considering 20's are factory.

 

[BeerOrGasoline]

are dems mavericks?

 

[Mr. SBF]

Windows need tint...

 

[Mr. SBF]

I use this guy Tint-Pro on Ebay for DIY tinting on the cheap. 26.97 shipped. BOOM

Ford F-250 Ext Cab 99-07 PreCut Tint -Any Shade or Mix | eBay

 

[BeerOrGasoline]

Frank needs da BJ tint on this sucker & 50 on the windshield.

 

[Outlaw]

are dems mavericks?

Fuel Rampage 20x10's. -19 BS and 305/55 Toyo AT2's.

These are not mine, they are identical to what I'm ordering. I had a friend swing over and let me test fit them to see if the backspacing would work. This is the truck they're off of.

Windows need tint...

I use this guy Tint-Pro on Ebay for DIY tinting on the cheap. 26.97 shipped. BOOM

Ford F-250 Ext Cab 99-07 PreCut Tint -Any Shade or Mix | eBay

Frank needs da BJ tint on this sucker & 50 on the windshield.

Happening this week I believe.

 

[BeerOrGasoline]

Ohhh I like these. Need to find a set that are ruined so I can fill the stupid fake rivets & powdercoat.

 

[Outlaw]

Just find a knock off set, these are 2 piece wheels and aren't cheap lol. If they weren't going to end up on the 6.7 soon-ventually I wouldn't be buying expensive ones.