Mac Off road Hpipe 2002 MUstang GT Question

adamzx3

Well-known member
Joined
May 24, 2007
Messages
73
Reaction score
0
So recently i picked up this off road h pipe and went to put it into the car. After a hell of a time getting the manifold bolts off, breaking one in the process finally got it in and tightened down. As i understand only the 2004 gts need 02 extensions for the rear o2's. And to get rid of the CEL i need the MIL Eliminators for the back o2's. But my problem lies in the front o2 sensors because i am missing about 2 inches in order to plug them into the harness. I don't know if anyone ever had that problem. Don't know if I should splice them or just get extensions for the front o2's. Or is there something else i can do
Thanks for any help i appreciate it
 

h0rsepwr

I wanna go fast!
Joined
Apr 13, 2008
Messages
340
Reaction score
0
I should have 1 BBK O2 extension left from when I installed my Prochamber. I only needed to extend one of them. I'll be in Oak Lawn on Friday if you need it.
 

serb82

Well-known member
Joined
Feb 10, 2009
Messages
1,075
Reaction score
1
You can extend the harness your self but use solder and tape and excellent quality of wire, not some flea marker speaker wire. The front o2 are very very sensitive to Resistance, so take your time and do it right.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top Bottom