Hey guys I need these out of here now! $300 on two 12'' Kickers with ported box and a California 1000W amp! These are the CVR122 dual two-ohm subwoofers. The woofer can handle a TRUE 400 watts RMS, and 800 watts Peak. They also feature a sensitivity rating of 86.7 dB and frequency response of 25-500 Hz. The details to the AP1000 amplifier are located below also. I will also include the Scosche converter for free as I do not need it.
Specs on One Sub
Kicker CVR12
Size 12 -inch
Impedance 2 ohms
Cone Material Injection molded poly
Surround Material Santoprene rubber
Sealed Box Volume (cubic feet) 1 - 4.6
Ported Box Volume (cubic feet) 1.75 - 2.25
Free-Air No
Dual Voice Coil Yes
Sensitivity 86.7dB
Frequency Response 25 - 0.5k Hz
RMS Power Range (Watts) 50-400
Peak Power Handling (Watts) 800
Top Mount Depth (inches) 6 1/4
Cutout Diameter or Length (inches) 11 1/16
Vas (liters) 95.37
Fs (Hz) 26.1
Qts 0.527
Xmax (millimeters) 12.64
Specs on Amp
2-channel car amplifier
160 watts RMS x 2 at 4 ohms (240 watts RMS x 2 at 2 ohms)
480 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
variable filters (low-pass from 50-250 Hz, high-pass from 80-1200 Hz, at 12 dB per octave)
variable bass boost (0-12 dB at 45 Hz)
stereo or bridged mono output
Tri-way capable (Tri-Way crossover required)
preamp- and speaker-level inputs
preamp outputs
fuse rating: 30A x 2
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
12-1/2"W x 2-1/16"H x 10-5/16"D
Specs on One Sub
Kicker CVR12
Size 12 -inch
Impedance 2 ohms
Cone Material Injection molded poly
Surround Material Santoprene rubber
Sealed Box Volume (cubic feet) 1 - 4.6
Ported Box Volume (cubic feet) 1.75 - 2.25
Free-Air No
Dual Voice Coil Yes
Sensitivity 86.7dB
Frequency Response 25 - 0.5k Hz
RMS Power Range (Watts) 50-400
Peak Power Handling (Watts) 800
Top Mount Depth (inches) 6 1/4
Cutout Diameter or Length (inches) 11 1/16
Vas (liters) 95.37
Fs (Hz) 26.1
Qts 0.527
Xmax (millimeters) 12.64
Specs on Amp
2-channel car amplifier
160 watts RMS x 2 at 4 ohms (240 watts RMS x 2 at 2 ohms)
480 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
variable filters (low-pass from 50-250 Hz, high-pass from 80-1200 Hz, at 12 dB per octave)
variable bass boost (0-12 dB at 45 Hz)
stereo or bridged mono output
Tri-way capable (Tri-Way crossover required)
preamp- and speaker-level inputs
preamp outputs
fuse rating: 30A x 2
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
12-1/2"W x 2-1/16"H x 10-5/16"D
Last edited: