Site Sponsor Injector Cleaning Specials for TCG!

[Boostie]

As a special deal for TCG members, Injector cleaning is being offered at a discounted rate of $100 for a set of 8 Injectors. If you ship them to me, I will ship them back free of charge! Turn around time in most cases is 24-48 hours.

Each service includes:

As Received

1. Resistance measurements
2. Leak Testing
3. Spray Pattern Check
4. Comparative flow testing

After that they go into an ultrasonic cleaning bath where they are cycled while submerged in a special formulated cleaning solution.

Once cleaned, they once again will get

1. Resistance measurements
2. Leak Testing
3. Spray Pattern Check
4. Final Comparative flow testing

Prior to shipping, all the o-rings are lubed and the injectors sealed up for storage until their next use. Each set gets its own report card with the data from start to finish!

Here is a set that was just completed that had ran pump E85 all season, what a difference!

Click to read more...

 

[Jimy Bilmo]

I’ll use you soon when we have a set of injectors at the shop!

 

[cap42]

I've got a set from my truck motor that could use cleaning and testing

 

[Shawn1112]

Will be using you in the next few months. I need to rip my lid off this winter and will do the injectors at the same time

 

[strtcar]

need to get mined cleaned here after the season is over....

 

[Boostie]

Bumping this up probably use this thread to post up some of the sets that have came through instead of making a bunch of threads, people have been reaching out as spring time is around the corner.

 

[Boostie]

Some old school 42# units from a dinosaur foxbody blower build. Big thanks to Pressure Ratio for the referral!

 

[Boostie]

ID1700x Injectors from a Turbo Coyote Car

 

[Pressure Ratio]

Some old school 42# units from a dinosaur foxbody blower build. Big thanks to Pressure Ratio for the referral!

It looks like they really needed a cleaning too!

Thanks for the fast and hands on service!

 

[Shawn1112]

I'm ripping my LSA off next month after WOW. I'll run my injectors out to you once I do

 

[Boostie]

Had the pleasure of doing a set of ID1000’s for 01bluesnake These had been sitting for a long time and one was stuck as received, but I was able to get it freed up and get them ready for reinstall. Thanks again 01bluesnake for the opportunity!

Fresh Clean Fluid to Start

Look at the nastiness and sediment on the bottom after cleaning!

 

[01bluesnake]

Had the pleasure of doing a set of ID1000’s for 01bluesnake These had been sitting for a long time and one was stuck as received, but I was able to get it freed up and get them ready for reinstall. Thanks again 01bluesnake for the opportunity!

View attachment 197910

Fresh Clean Fluid to Start

View attachment 197911

Look at the nastiness and sediment on the bottom after cleaning!
View attachment 197914View attachment 197912View attachment 197913View attachment 197915

Thank you again for getting these knocked out. They looked like absolute trash before lol. I'm gonna yank the set out of the Holley install car next week and have you do those too, im sure they could use a cleaning.

 

[Shawn1112]

I'm going to rip my blower of my 71 in the next couple of weeks. I'll run my ID1300's up to you as soon as I do.
What area are you in?

 

[turtleman]

After this mysterious chipped piston situation I think I'm gonna go ahead and send you a couple sets of 6 or maybe drop off. on the weekend if youre around.

 

[Mook]

Boostie

 

[Ti28]

Where you located?

 

[Mook]

Boostie please respond

 

[Boostie]

Hi all, sorry I have been traveling last week and this week. I am near ohare and will be back Friday night. If anyone wants to ship them I can still do that or I should be in town the next couple weeks and can meet up if its easier.

 

[strtcar]

Boostie sent you a message on FB, looking to have a set cleaned.

 

[Boostie]

strtcar Messaged ya back, went to the spam folder and I didnt get notified!