1974 351w short block
-bored 0.040" over
-Speed-Pro L2446-40 forged pistons
-stock "football" rods w/ ARP bolts
-stock crank
-converted to roller
-unknown aftermarket cam
-Ford Motorsport main girdle
-Ford Motorsport SFI rated balancer
-double roller timing chain
-Melling M83 HV oil pump
-Moroso 7qt oil pan
-Harbor Freight 750 lb engine stand included
$650
The cylinder walls have some light surface rust. It will need to be taken apart, cleaned, and honed. There's no major pitting, so it shouldn't need to be bored. There are no ridges at the top of the cylinders. There is still a nice cross hatch on the cylinder walls. This engine has just been sitting for awhile.
You will need a cradle stand to transport. I can also deliver within reasonable distance (~20 miles) as long as you have an engine hoist and can help me unload it.
-bored 0.040" over
-Speed-Pro L2446-40 forged pistons
-stock "football" rods w/ ARP bolts
-stock crank
-converted to roller
-unknown aftermarket cam
-Ford Motorsport main girdle
-Ford Motorsport SFI rated balancer
-double roller timing chain
-Melling M83 HV oil pump
-Moroso 7qt oil pan
-Harbor Freight 750 lb engine stand included
$650
The cylinder walls have some light surface rust. It will need to be taken apart, cleaned, and honed. There's no major pitting, so it shouldn't need to be bored. There are no ridges at the top of the cylinders. There is still a nice cross hatch on the cylinder walls. This engine has just been sitting for awhile.
You will need a cradle stand to transport. I can also deliver within reasonable distance (~20 miles) as long as you have an engine hoist and can help me unload it.