🔧 BUILD Daytona's - 93 Notchback

[Mr. SBF]

QUOTE=daytona;3363692]Christmas came early this year.



[/QUOTE]


Nice I need buy the same except the tubs, I can make those... Look's like Team Z stuff!

 

[SHARKBITEATTACK]

nice build. I love 351W motors in foxes. Cant even imagine what a turbo and stroker would be like

 

[daytona]

QUOTE=daytona;3363692]Christmas came early this year.

Nice I need buy the same except the tubs, I can make those... Look's like Team Z stuff![/QUOTE]

Yes sir all from team z. Just trying to get a surplus amount of parts for when I bring the car back home so I got plenty to do on the car

 

[Terminator-Fux]

Ready for Stratz yet?

 

[daytona]

Ready for Stratz yet?

Lol that's all this car is gonna be at. No race car stratscar

 

[daytona]

Well these finally decided to show up after months lol

 

[GIMPY]

Yeah that was my first turbo I wanted but Im on an extremely tight budget. And I got the 475 for real cheap. Plus I'm sure I could send it back and get a different turbine wheel

U can get it with a 89 mm exhaust wheel and a t6 1.32 housing. That's what I have but I have an 11 blade billet compressor wheel. It was cheapier than the s480 but can make almost the same power

Deffinetly going to be a good build.

 

[daytona]

Was finally about to start on my junk box. Cut out the wheels wells and trunk floor. And cut the front end off the car

 

[Mr. SBF]

Nice! Are you going to make a custom tubular front or are you going with a pre-made tubular front nub kit?

 

[turtleman]

Nice to see stuff happening
You got it at your place now?

 

[daytona]

Nice! Are you going to make a custom tubular front or are you going with a pre-made tubular front nub kit?

Ya know I'm 50/50 on it right now. Found to companies that make pre mad ones. Both are different in many ways. But the money they wants for them are ridiculous.

 

[daytona]

Nice to see stuff happening
You got it at your place now?

Yeah everything is there

 

[Eagle]

Holy crap dude. YOU CUT THE TRUNK OUT OF THE CAR

 

[daytona]

Holy crap dude. YOU CUT THE TRUNK OUT OF THE CAR

Lol yes sir. Who needs a trunk lol but I got rid of the spare tire well. Gonna use sheet metal to make it flat back there and recess the fuel cell into it

 

[Mr. SBF]

Ya know I'm 50/50 on it right now. Found to companies that make pre mad ones. Both are different in many ways. But the money they wants for them are ridiculous.

My buddy just ordered one from 417 motorsports on black friday for his car, should be here soon. I'm going to see how well his goes and check the quality then I might get one. The top head light support bar is removable so you don't have to have the motor and trans up so high is kinda cool.

 

[daytona]

My buddy just ordered one from 417 motorsports on black friday for his car, should be here soon. I'm going to see how well his goes and check the quality then I might get one. The top head light support bar is removable so you don't have to have the motor and trans up so high is kinda cool.

Actually this was the exact one from 417 that I was looking at. I was talking to Blake about it a lot just never committed to it yet. Price just seems alittle high for what is it ya know. I'm sure it's great quality. Plus I was gonna add bars to this and run them into the cage in the car.

 

[Mr. SBF]

For sure you would have to stub through the other side of the strut tower to the cage with it. If I had a nice bender or access to one I would definitely just try and make one vs paying $750 + shipping. The Gt project I'm doing already has bars that tie in straight though along the strut tower.

 

[FESTER665]

Holy crap dude. YOU CUT THE TRUNK OUT OF THE CAR

Right? Meanwhile I'm over here being a bitch about welding IRS brackets onto the car or not.

Great build so far... Will continue to watch it.

 

[PJx5x]

417 makes high quality stuff. Their builds are top notch, I wouldn't hesitate ordering from them at all.

 

[daytona]

417 makes high quality stuff. Their builds are top notch, I wouldn't hesitate ordering from them at all.

I hate when your right and convince me by doing nothing.

 

[daytona]

Was able to weld in the coil over crossbar today. Gonna cut the other tub out soon and fit the mini tubs in

 

[daytona]

Mini tubs all tacked in just gotta finish welding the rest of it. ARB in. Waiting for the the rear end to come back from getting narrowed and braced etc. then fitment for the trunk floor.

 

[daytona]

Had some things to focus on other then the care these past few months but I'm back on it. Finished the frame rail install and mocked up the rear end

 

[cap42]

Nice! Who did the rear end?

 

[daytona]

Nice! Who did the rear end?

Neil Becker out of Lombard