Yea in reality it wouldn't last long under the car just put them on for shits and giggle's to see if they would actually fit (technically they do and dont touch anywhere within 1.5") BUT still to much tire will be going way down in size
Last round of sanding will be in a few days 320 then 600 wet then can put on car after that's wet sanded Im soooo happy I am able to keep moving forward with this Bodywork Durablock kit sure makes it easy for sure
More Progress on the Chevelle today I installed the new door that I have been working on and I will be dammed if it didn't fall one time and scratch it (after 2 round's of blocking) So when I got it all smoothed out I had to put the Etching primer Where I blocked thru the Primer surfacer to Bare Metal, Well will post more when I do more Thanks for Viewing
Ready for 320 wetsand and then on to the other side then to scuff prime the roof and hood then Seal it up for Spring time In the side Shot the door pin and Bushings need replaced then will be spot on
Well Been a Minute but Sold the Keystone Raiders and Cragar S/S front wheels and It ended up Funding Brand New out of Box 15x10 and 15x7 US WHEEL 462 super spokes if you ask me a direct twin to Cragar S/S and half the price of them, Also the sale of them funded the Parts needed to finish the 454 up so with the warm weather still here thats the Plan Friday started disassembly and cleaning finish's up today, Installing new rings,bearings, cam, etc. Hopefully all goes well will be finally done by WednesdayI ABSOLUTELY HAD TO Ol Skewl Kewl the drums and Caliper
New Piston rings are on, Crank is in (kinda) have to torque them yet (caps are just snug for now) ran out of daylight and my Little 12 x16 Shed has now power or lights MAN COME ON SPRING for possibly a garage LOL
Tomorrow if little warmer with no rain Hopefully will get more stuff on it ...... Looking to get Cam, Heads, Intake And carb on there for the hibernation till spring
Yayyyyyy Cam in,....Timing chain (PITA BTW) IN Heads back on and torqued down in 3 sequences. Intake just sitting on there have to drop lifters in there yet harmonic Balancer has to go on yet and oil pump the bolt never showed today....
I have 30w oil in the head since I am not starting till Next spring with an added twist of Assy lube LOL
Just wanted to get a Shot of how would look going into car LOL
454 Motor Monday (almost done for now) balancer just started on there its coming back off I am gonna paint the rest of Block and ALSO painting the Black timing cover I dont like it (scuff it and paint it) Wires just sitting on there also............. Also the Oil pump Bolt FINALLY showed up only 4 days later than tracking said it would geeezzzzz Thats why Oil pan is not on