3800 who needs what done at the mod day

[Fish]

Does it tune for 99 L36s??

Also I MIGHT have another WP pulley that I can sell as well. Gotta check the leasing office to see if it came in yet.

Mike K, do you have any PCM pins that I can use to plug in my performance shift?

 

[BumpinGTP]

I'd like to swap in a ported blower

I can take care of this for you

 

[imported_GraFFix]

Im not doing anything to my POS...unless someone has a 97 alternator that works and doesnt whine and rattle like mine is.

 

[BumpinGTP]

i have one in my garage in columbus, but i dont think it will fit in my suitcase since i am bringing home so many other parts for people already, I will try though.

 

[CoolGTX]

bumpn,

bring that stock diff, so I can get this POS outta my car, asap...OK?

 

[Royalgtp]

taking it totally out now huh?

 

[CoolGTX]

Originally posted by RoyalGTP@May 17 2005, 05:25 PM
taking it totally out now huh?

[snapback]84213[/snapback]​

well, I dont trust it, and I WONT RACE IT!, like this... :angry:

might have to miss a few events this year, including this weekend.... :angry: :angry: :angry:

 

[imported_Ron Vogel]

Originally posted by CoolGTX@May 17 2005, 04:54 PM
bumpn,

bring that stock diff, so I can get this POS outta my car, asap...OK?

[snapback]84203[/snapback]​

I hope you can get it, I was hoping you could test out a new traction control toy I made this week.






Also, I need a fw guys that run slicks to test this contraption, installs with 2 bolts in 5 minutes or less.

 

[syP]

still need a person to run this traction mod?? (i will do anything for traction)

 

[Mike K]

Originally posted by Ron Vogel+May 17 2005, 06:35 PM-->

<!--QuoteBegin-CoolGTX

@May 17 2005, 04:54 PM
bumpn,

bring that stock diff, so I can get this POS outta my car, asap...OK?

[snapback]84203[/snapback]​

I hope you can get it, I was hoping you could test out a new traction control toy I made this week.






Also, I need a fw guys that run slicks to test this contraption, installs with 2 bolts in 5 minutes or less.

[snapback]84226[/snapback]​

[/b]

Ron, We can toss it on my car. Currently it's running an open diff and Nitto 555Rs. My best 60ft was a 1.98 and I got that once...

 

[mybluegtp]

Originally posted by syP@May 17 2005, 06:56 PM
still need a person to run this traction mod?? (i will do anything for traction)

[snapback]84230[/snapback]​

:blow:

j/k :lolsign:

 

[imported_Ron Vogel]

It's open to anyone who want's to check it out during open runs, but I plan on having on MY car for brackets.

 

[Royalgtp]

what is the failure rate of a stock LSD with someone of your power JO? It cant be much better, no?

 

[Fish]

If its a bunk LSD. it shouldnt matter what power your making. Get it outta there ASAP.

 

[CoolGTX]

Originally posted by Ron Vogel@May 17 2005, 10:20 PM
It's open to anyone who want's to check it out during open runs, but I plan on having on MY car for brackets.

[snapback]84259[/snapback]​

hey Ron,
I'll give it a shot as soon as i'm up and Confident with my car. Shouldnt be toooooo long.. BUMPN!!!!!!!!!!!?????????????





JJ,

I ran an open diff for 2 years=mid 13's, then ran low 13's with a cya diff, all this time NO Burnouts, and 60s as low as 1.85 (low 1.9s consistent) on street tires, with No traction mods.
As soon as I started to use slicks, is when all my troubles began, stretched chains, broken gears, broken input shaft, broken cya diff, and all the crap so far with the Intense stuff. So far i've done about 15-20 burnouts with this tranny, and it wont see anymore for awhile. When I get back to the track, it will be street tires again..till I get a good working tranny.

I guess to answer your question, pretty long with No burnouts, give or take. With Slicks, anyones guess.

 

[syP]

rofl fredo..


Ron.. we will talk at the mod day

 

[CoolGTX]

Ron, is your welder portable?

 

[BumpinGTP]

Johnny, I will yank the diff out on thursday or friday for ya.

 

[HUNTERDOG]

I'd like to have a bikini wax Ouch!

 

[Bliss Racing]

Can anyone do front and rear manifolds?!?

 

[imported_Ron Vogel]

Originally posted by CoolGTX@May 18 2005, 12:00 AM
Ron, is your welder portable?

[snapback]84296[/snapback]​

Yes, and I've even used extension cords on outlets with only a 15amp breaker. As long as nothing else is a big current draw on the same circuit it's kosher. I'm getting a little low on sheilding gas and I don't think I'll get a chance to refill it this week. As long as it's not a big project it should last.

 

[imported_Theautoguy]

Originally posted by Bliss Racing@May 18 2005, 01:15 AM
Can anyone do front and rear manifolds?!?

[snapback]84301[/snapback]​

I've gotten pretty good with them. I don't know about the mod day though. I could help a brother out on the front one but as far as both..? I could help you with both of them if you wanted to trek out the Machesney Park (just north of Rockford) for a day.

Let me know, I'll be at the mod day around 10.

Don

 

[syP]

Bliss... i can help you out for a little...

 

[LeeGTP]

Will we be able to wash and detail our cars there. Its time to wash,clay,polish, and wax her. )

 

[SaturdaysGS]

Originally posted by LeeGTP@May 18 2005, 12:48 PM
Will we be able to wash and detail our cars there.  Its time to wash,clay,polish, and wax her. )

[snapback]84373[/snapback]​

If you do mine, then sure



But really I dont know..