In the past, I've just normally added r134a to my cars and no issues every like 3 years. Get them in the nice 40-45 psi and it's cold. Yea it might be a hack way but $10 for a can every 3 years is golden to me.
So now I tired to help some friends on their Honda products. Same process but the r134a wouldn't go into the system. Ac button is on. Fans were on. Couldn't see the compressor or hear it kick on. But psi was in the 100-110.
Had the car warmed up. Rev to 3k. 15 minutes later the 12oz can was still full. I disconnected to see if I pierced the can. And sure enough I did. Why won't the system take it?
Should I try to jump the relay? Or is there a switch on these Honda.
So now I tired to help some friends on their Honda products. Same process but the r134a wouldn't go into the system. Ac button is on. Fans were on. Couldn't see the compressor or hear it kick on. But psi was in the 100-110.
Had the car warmed up. Rev to 3k. 15 minutes later the 12oz can was still full. I disconnected to see if I pierced the can. And sure enough I did. Why won't the system take it?
Should I try to jump the relay? Or is there a switch on these Honda.