I have a fancy GM aux trans cooler on my car and as of right now it is spliced into the stock rubber section of the transmission cooler line with some metal hose barbs and clamps. Every thing is working properly, but is just bothers me to have a ghetto looking splice and clamp that if it ever did come apart I would probably smoke my trans.
Now what exactly would I need to fix this with some hard line tubing or a with a similar set up like rich has on his Lumina?
I think the stock hard line is 5/16 but I am not 100% sure.
My setup currently flows from the trans to the radiator, then to the aux cooler, then back to the trans. I dont see any problem with is
So yeah what do I need to do.
Oh by the way the metal hose barbs are pretty wicked. I tried to pull the rubber line of the hose bard and it was not happening......
Now what exactly would I need to fix this with some hard line tubing or a with a similar set up like rich has on his Lumina?
I think the stock hard line is 5/16 but I am not 100% sure.
My setup currently flows from the trans to the radiator, then to the aux cooler, then back to the trans. I dont see any problem with is
So yeah what do I need to do.
Oh by the way the metal hose barbs are pretty wicked. I tried to pull the rubber line of the hose bard and it was not happening......