i have a metco #2 lower, upper setting, billitflow pulley set with 100mm idler, billitflow 2.76 on s.c. also, i did notch the tensioner ! i know there are 100+ people out there running the same set up ! what is the gates belt size please???
follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_requires_accessing_site_using_safari
With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 2lb Metco Lower kit
Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX...............4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX...............4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX...............4080XXX (must use 92mm Idler Pulley)
2.93..............78.0"................K080780...............4080780 (with 100mm Idler)
2.76..............XX.X"................K080XXX...............4080XXX (with 100mm Idler) (Stock Belt)
Should be the stock belt size 75"
Is it too small? Then go a 1/2" bigger
Is it too big? Then go a 1/2" Smaller
One is going to work, that is the process I had to go through when I installed my larger alternator pulley since I couldn't find my exact combo. The stock belt should be very close.
i keep having to order them on line, long process when its not the right one, is there a local place that has them in stock, besides a dealer ??
Napa is a stocker!
Have to ask by part # not by vehicle #