-
đź’ˇ Fun fact. Whenever you start a thread, TCG Mechanic 5000 (our AI bot) will reply to you to start helping. It doesn't know everything and it will struggle with more complex questions but it can get the thread going and provide valuable information. You can choose to disable it prior to submitting a thread.
New 19" Drag Radial comming!!!
- Thread starter Since 1964
- Start date
http://www.summitracing.com/parts/MTT-3723R/
* $333.35 each
* Tire, ET Street Radial, 28 x 12.50R19, Radial, R2 Compound, Blackwall,
* Application Specific
Application Specific Part: Check Application
* Savings
$10.00 Certificate that can be used on future purchases. Summit bucks are redeemable via phone, mail, online or by presenting them at a retail location.
* Warnings
The part MTT-3723R has an additional shipping charge of $8.00 per item due to its large size and/or weight.
* Estimated Ship Date: 5/9/2011
$666.70 plus all shipping charges, for 2 tires!
Good find there Aron. The woman at MT told me the Manufacturers list price was $437.00ea.
Yikes. I looked at the link for Summit and see a min. width of 10" for mounting.....NOW WHAT....does that mean my 9.5 won't work?
I once had a set of BFG's that were too wide and looked like shit mounted on my OEM 03 wheels.
Yikes. I looked at the link for Summit and see a min. width of 10" for mounting.....NOW WHAT....does that mean my 9.5 won't work?
I once had a set of BFG's that were too wide and looked like shit mounted on my OEM 03 wheels.
I really doubt it. a 315 is almost 12.5" wide. Talk to someone at Summit or Nitto
Rule of thumb is you can go 1" +/- from thread width, which in this case is 11.2". Can you put it on a 9.5" wheel? Yes, but it is not ideal. Like Jason said, the tread will be bulged, so the centers are going to wear fast and you won't have an ideal contact patch. You may be able to run lower tire pressure to get your patch back, but that's going to slow you down. Regardless you'll be better off getting the proper wheel for this tire or the proper tire for your wheels.
it really depends on the manufacturer of the tire. one company's 305 could be narrow than one company's 285 while it could be also be wider than another company's 315.
It will probably mount up no problem on a 9.5 but will buldge a little bit.
Its no different than the mustang gt guys running 275's on their 17x8's.
It will probably mount up no problem on a 9.5 but will buldge a little bit.
Its no different than the mustang gt guys running 275's on their 17x8's.
More than enough, guys have been doing it on the 07-09 cars for a few years.
I have my 305's (my 19 inch street tires and my 18 inch MT DRs) both mounted on 9.5 inch rims. Ideally you'd want a 10", but the 9.5 will work effectively. Unfortunately, those tires are too tall for my needs. My 305/30/19 RE-11's and 305/30/18 MT DRs are both nearly perfect at 26.3 diameter.
How tall are the factory tires on the GT500?
M/T's and Nitto's ect. The chart is just what the manufacture wants you to use to cover there ass. There is no reason in the world that a half of an inch is going to make a bit of difference!
Thread Info
-
Created -
17Replies
-
1KViews
-
Participants list
