10th Anniversary Cobra Caliper Set

Is anyone interested in 10th Anniversary Cobra Front Caliper set with brake pads. If so I can order set of front/rear calipers and part out the front to you for about $200 or $230 w/ stainless brake lines that I have (Used).

The calipers require the coarse threaded banjo bolts which is another $14 w/ 4 crush washers if you do not have them already.

If no interest I may just order the rear calipers for myself since I do not need the front.

Click to read more...

 

[scca_stang]

yeah dude!!! I'll go in on this...

I will need the stainless lines and crushwashers... so $244 right?

call me 815-508-4808

 

[VenomousDSG]

So this is all used?

 

[Mystic Terminator]

It is all new, SCCA is taking it...

It is about $410/shipped for F/R + $14 Banjo + $50 if you want to order a set.

 

[ShelbyGuy]

are you un-tracking the car??

 

[PETSNKE]

I bet it will only takes 3 sessions for Vince to burn off that pretty red paint on the rear calipers

Hope you can get them soon, 7 days till the NW Road America event

 

[Mystic Terminator]

are you un-tracking the car??

No, re-tracking the car. :alcoholic I wanted to replace the rear calipers, it seems to me like I have too much slop between caliper and caliper pin. I also bought new caliper pins which I suspect will only a small amount, I believe there is some wear in the bore of the caliper where the pin goes in. I've always had it greased good, but whatever.

In hindsight I should have just bought the black ones for $200 rather than trying to save some $$$ splitting up a kit. I will most likely paint them blue or black before RA if I get them by Friday.

 

[scca_stang]

Thanks for the Fronts... You are good people Vince... Good luck at RA

 

[Mystic Terminator]

Thanks Ben! I found out the rear diff bushing did not have holes on- center, so I can't reverse it. I am bringing it into work and I will mill it down. It just puts me behind a 1/2 day.

Thanks for splitting the cost of the kit, saving us a couple of $$$ each.