2001 Cobra Engine Parts

1 brandy new never used but slightly shelfworn (no plastic bag, no box - slight surface rust where i touched it on the snout) 2001 Cobra Kellogg crankshaft - $600 obo

1 pr '99 cobra extrude honed heads - used. shelfworn (been in my unheated garage for a while) $350/pr - bare.

1 mystery block - aluminum 4.6 block, used, bare, experimental engineering number on the side rather than a production engineering number. $150 obo.

1 pr 4.6 dohc head gaskets, loose, but new ford - $100 obo

I'm not messing with pre-03 stuff anymore. get it out of my garage so i can replace it with new stuff i'll never use.

Click to read more...

 

[The Pun]

1 pr '99 cobra extrude honed heads - used. shelfworn (been in my unheated garage for a while) $350/pr - bare.

1 mystery block - aluminum 4.6 block, used, bare, experimental engineering number on the side rather than a production engineering number. $150 obo.

1 pr 4.6 dohc head gaskets, loose, but new ford - $100 obo
QUOTE]

Will these heads work on a 96 cobra, and will I gain anything?

 

[ShelbyGuy]

96-98 heads are dual port heads with the imrc controller. 99-up heads are tumble port. you would need at the very least a 99-up intake manifold assembly and your tuner can probably turn off the imrc control.

im just selling the parts. im not offering technical support for conversions.

1 pr '99 cobra extrude honed heads - used. shelfworn (been in my unheated garage for a while) $350/pr - bare.

1 mystery block - aluminum 4.6 block, used, bare, experimental engineering number on the side rather than a production engineering number. $150 obo.

1 pr 4.6 dohc head gaskets, loose, but new ford - $100 obo
QUOTE]

Will these heads work on a 96 cobra, and will I gain anything?