I have a set of Aluminum Brodix Spec heads complete with everything plus Pushrods. The heads came off my 406. These heads have 500 miles on them.
I will get pics when the heads come off the motor.
$1,000 for the complete set ready to install. shipping is seperate, pick up is welcome.
23 degree heads.
221cc Intake chamber
67 CC combustion chamber
Valve size is 2.080/1.600.
Stainless valves
Angled plug
phosphorous bronze valve guides
Hardened valve seats
Exhaust pattern and valve centerline are standard
Minimum of 11:5.1 for these heads.
Power for these is made within 3500-7000
They can be used for pro street,Drag racing, and oval track racing.
0.700 they flow 279 CFM stock.
.700 max spring lift
Titanium retainers
Valve bowls blended
Mind you these figures are stock figures. These heads have been C&C machined ported. They flow more than what is listed. Im not sure what exactly as my machinest doesnt have a flow bench.
Call 224-520-3157 with any questions.
I will get pics when the heads come off the motor.
$1,000 for the complete set ready to install. shipping is seperate, pick up is welcome.
23 degree heads.
221cc Intake chamber
67 CC combustion chamber
Valve size is 2.080/1.600.
Stainless valves
Angled plug
phosphorous bronze valve guides
Hardened valve seats
Exhaust pattern and valve centerline are standard
Minimum of 11:5.1 for these heads.
Power for these is made within 3500-7000
They can be used for pro street,Drag racing, and oval track racing.
0.700 they flow 279 CFM stock.
.700 max spring lift
Titanium retainers
Valve bowls blended
Mind you these figures are stock figures. These heads have been C&C machined ported. They flow more than what is listed. Im not sure what exactly as my machinest doesnt have a flow bench.
Call 224-520-3157 with any questions.
Last edited:
