Well I have a Custom Sub/Amp/Nitrous bottle setup for sale. The setup will fit in a C4/C6 vette and possibly other cars. dimensions are 33" long, 34" wide, 44" corner to corner, and 13" high. Holds 2 8 inch subs, 2 amps and the nitrous bottle sits in the middle as shown. All fiber glass and painted gloss black. Asking $500
I have 4 JL 8w6's. 3 of the 4 are in new condition. 1 has a slight scuff on the outter foam but does not effect performance. Asking $100 per sub.
Fs (free-air resonance): 0.466
Qts (total speaker “Q”): 0.511
Qes (electrical “Q”): 5.500
Qms (mechanical “Q”): 0.79 22.4
Vas (equivalent compliance): 0.388 9.9
Xmax (linear excursion one-way): 83.6 dB
Effi ciency (1W/1m)*: 30.7 0.0198
Sd (effective piston surface area): 10.6 Ω (in series)
Re (DC resistance): Dual 6 Ω
Znom (nominal impedance): 200 Watts
Pt (continuous thermal power handling):32.5 Hz
I have an Alumapro (the C.A.P) 5 farad, Basically new as well.
Asking $100
I have 4 JL 8w6's. 3 of the 4 are in new condition. 1 has a slight scuff on the outter foam but does not effect performance. Asking $100 per sub.
Fs (free-air resonance): 0.466
Qts (total speaker “Q”): 0.511
Qes (electrical “Q”): 5.500
Qms (mechanical “Q”): 0.79 22.4
Vas (equivalent compliance): 0.388 9.9
Xmax (linear excursion one-way): 83.6 dB
Effi ciency (1W/1m)*: 30.7 0.0198
Sd (effective piston surface area): 10.6 Ω (in series)
Re (DC resistance): Dual 6 Ω
Znom (nominal impedance): 200 Watts
Pt (continuous thermal power handling):32.5 Hz
I have an Alumapro (the C.A.P) 5 farad, Basically new as well.
Asking $100
