I am selling my FLT level 6 transmission that I just had refreshed/revised/dyno'd at FLT by Chuck. This is practically brand new with all new softparts and inspected by FLT. Chuck also installed newer revised hardparts that he uses in his latest level 6 builds. I am looking for $2500 for it with no core exchange needed. Brand new these go for 2700 with a core exchange. It comes with AN fittings as well. Shipping will be $150 and will be packed and shipped directly from FLT. Local pickup is welcome as well. No core exchange and no waiting as this trans is ready for pickup or shipping.
I also have a Circle D GM 258mm Pro III 4L60 LS Torque Converter for sale. It is $850 but could work a deal if buying both.
Specs
FLT machined performance pump.
Media blast case, bell housing, and tail housing to restore a new aluminum finish. Prep case for assembly.
FLT sleeved input drum
FLT (billet 6061 aluminum) overrun piston
Sonnax SmartShell w/bearing kit
GM 5 pinion input carrier
GM 5 pinion reaction carrier
Bearing style reaction shaft
New reverse input drum
Alto wide 2-4 carbon lined band with reinforced anchor
8 B/W hi-energy clutches w/koleen steels in 3-4 clutch
Extra Wide Heavy Duty double caged 29 element sprag
4L65 low roller clutch
Corvette Servo
Sonnax super hold 4th servo
Bushing kit
New solenoids
New Spacer plate
B/W clutches
Seal & gasket kit
Filter
GM deep pan
Updated aluminum accumulator pistons
FLT calibrated valve body w/ HD 2-3 shift valve modification
Set end play to FLT specs
Case cooler fittings
-Optional Parts
300M Billet 2wd output shaft: ($495.00 ) -included
6 A/N Male Cooler Fittings: ($25.00) -included
Please PM me with any questions. Payment is either via Paypal or Cash.
I also have a Circle D GM 258mm Pro III 4L60 LS Torque Converter for sale. It is $850 but could work a deal if buying both.
Specs
FLT machined performance pump.
Media blast case, bell housing, and tail housing to restore a new aluminum finish. Prep case for assembly.
FLT sleeved input drum
FLT (billet 6061 aluminum) overrun piston
Sonnax SmartShell w/bearing kit
GM 5 pinion input carrier
GM 5 pinion reaction carrier
Bearing style reaction shaft
New reverse input drum
Alto wide 2-4 carbon lined band with reinforced anchor
8 B/W hi-energy clutches w/koleen steels in 3-4 clutch
Extra Wide Heavy Duty double caged 29 element sprag
4L65 low roller clutch
Corvette Servo
Sonnax super hold 4th servo
Bushing kit
New solenoids
New Spacer plate
B/W clutches
Seal & gasket kit
Filter
GM deep pan
Updated aluminum accumulator pistons
FLT calibrated valve body w/ HD 2-3 shift valve modification
Set end play to FLT specs
Case cooler fittings
-Optional Parts
300M Billet 2wd output shaft: ($495.00 ) -included
6 A/N Male Cooler Fittings: ($25.00) -included
Please PM me with any questions. Payment is either via Paypal or Cash.
