Hey Everyone. If I cant get the car to spark. Some type of distributor issue. And im not dealing with it anymore. Going to school in Huston, Texas. So im in need of money, instead of a 15k car sittting in my garage. Try to find someone to pick up the car thats 99.9% complete. or having to deal with parting everything out. Id like to sell the car complete and take a small hit on it due to it not actually running. The cars so close to being done, fresh oil/coolant/trans fluid. Im just getting tired of dicking around and spending all this damn money to not see it move.
11K OBO TAKES IT HOME NOW!!!!!!
So im entertaining the thought of a part out
Heres the huge list of parts.Everything is either BRAND NEW. Just installed for start up but new, or less than 1000miles.
This is a show winning 1991 Mustang GT with 33,**** original miles. Absolutely no rust, never sees anywhere but in insulated garage. I have reciepts for everything and anything.
I will let the car go as it sits right now for 13kOBO or wil trade for a pretty damn quick mustang.
Parts List. Starting with rear end-engine.
Rear End
-8.8
-Ford Racing 3:73 Ring/Pinion
-Auburn Posi
-Moser 31 Spline 4lug axles
Trans
-T-5
-UPR Double Lock Firewall Adjuster (Brand New-only installed) $25.00
-UPR Adj. Clutch Quadrant (Brand New-only installed) $25.00
-Hurst Short Throw Shifter $120.00 / 140 with knob
-Custom Billet Shift Knob $25.00
-Ford Racing Steel Bearing Retainer (Brand New) $35.00
-Centerforce Throwout Bearing (Brand New) $35.00
-Stock Resurfaced Flywheel by Surge (0miles) $45.00
-Spec Stage II + Clutch/Pressure Plate (500miles)
-Energy Suspension Poly Trans Mount (Brand New) $20.00
-Ford Racing Aluminum Drive Shaft $200.00
-Lakewood Saftey Loop $20.00
-Subframe Connectors $50.00
Everythings bolted up, torqued and properly greased
Freshly Painted/Clearcoated
Fuel
Ill let the complete fuel system go for $1000.00
-Stock Sumped Gas Tank -8 Feed -6 Return
-Bosch 390 Inline Fuel Pump
-10 + 100 Micron Fuel Filters
- -8 13ft Earls Stainless Steel Braided Feed Line (tank - Y-block)- -6 15ft Earls Stainless Steel Braided Return Line (Tank-FPR Fitting)
-Aeromotive Billet Aluminum Y-Block w/fittings
-Aeromotive Adj. FPR 131011 (Boost Ref.) with fittings+guage
-Aeromotive Billet Red Fuel Rails$160 with fittings/lines
-4 (-8 Stainless Steel Braided Rail Feed Lines) Both Rails are feed in back and go out both front an fittings.
-All Fittings
Everything is Mounted and Routed
Motor
Ill sell the motor complete from oil pan to upper intake starting at $2200.00 then ill add in if you want the water pump/alt/brackets/ ect.
91 302 with factory forged internals (33,*** original miles) Unmolested
-Pained Ford Racing Blue $300.00
Pan to intake
-Energy Suspension Poly-Motor Mounts (only a few hundred miles) $80.00
-Moroso 7qt Rear Sump Oil Pan $175.00
-Melling HV Oil Pump (200miles) $30.00
-Ford HD Oil Pump Shaft (Brand New) $15.00
-Ford Racing M-6250-E303 Camshaft $140.00
-Edelbrock Stage 1 Aluminum Heads (lg Intake) $1200.00
-Manley 25625 6.250 Chromeoly Harded Pushrods (200miles) $ 120.00
-Ford Racing 1.72 Rockers M-6564-D351 $ 200.00
-Ford Racing Custom Sheetmetal Valvecovers $100.00
-Edelbrock Performer 3828 Upper/Lower Intake $300.00
-Edelbrock/BBK 70mm TB EDL-3825 $140.00
ACC.
-Ford Racing Hi Torq./Mini Starter (200miles) $100.00
-Power Master Alternator 8-47100 (100miles) $90.00
-March Chrome Adj. Alternator Bracket (Brand New) $40.00
-2 K & N Oil Filter HP-2004 (Brand New) $11.00 Each
-8 NGK V-Power Spark Plugs (Brand New) $15.00
PowerAdder
-Cartech Sreet Sleeper Turbo Kit
Kit Includes
Will sell whole kit for $2000.00
Kit + MAF/INJ $2500.00
1 3/4" T304 Stainless Turbo Header (ceramic coating)
1 5/8" Passanger-Side Header
3" Downpipe (Heat Wrapped)
2 1/4" Crossover Tube
2 1/4" Y-Pipe with Ball Flanges
2 1/4" Black Powder Coated Intercooler Piping
3" Bar-Plate Intercooler (vertical charge flow)
12psi bypass valve
Silicon Intercooler Hoses
All t-bolt Clamps Brand New
-Percision 60mm t-4 Turbo (FRESH) 0 MILES!!!
-StainlessSteel Braided Oil Feed
-(-6 Braided Oil Drain Hose with both an fittings
-Drivers Side Header (hotside)
-Passenger Side Header (cold side)
-Turbonetics RaceGate
-Bosch Recirculating Valve
-Manual Boost Controller
-Lucas 42lbers (excellent shape) $200.00
-Pro-M 3" Protube Cal'd for 42lbers (excellent shape) $200.00
All Pipes were coated in VHT 1600Degree High Temp Paint, Then Wrapped in Fiberglass Exhaust Wrap.
Ignition
-Stock Motorcraft Dizzy $40.00
-MSD Cap+Rotor (200 miles) $15.00
-MSD 8.5mm Super Conductor Wires (Brand New-just installed) $40.00
-MSD 6BTM MSD-6462(Only 200miles) LooksBrand New $300.00
-MSD Ignition HVC Ignition Coil MSD-8227(200miles) $30.00
-MSD Ignition Coil Harness MSD-8874(200miles) $12.00
Cooling
I'll let the whole cooling system go for $420.00
-31" x 19" Custom Aluminum Radiator (200miles) $200.00
-Flex-a-lite 210 Dual 12" Sucker Low Profile Electric Fans w/adj Thermo (200miles) $220.00
-Trick Flow 3 x 8 Polished Chrome Coolant Overflow Tank (200miles) $35.00
-Edelbrock Victor Jr. Aluminum Water Pump (200miles) $130.00
Suspension
-Saleen 2" Front+Rear Lowering Spings
-Lakewood 70/30 Front Struts
-Custom Painted Red Front/Rear Swaybars
-Energy Suspension Front Sway Bar End links (BRAND NEW) $20.00
-BBK Upper/Lower Rear Control Arms
-Subrame Connectors
Wheels
-18" Cobra y2k Chrome Rims 4-lug (Flawless)
-Nitto NT555 Tires (Only Near 1,000miles on them)
Body
-91GT Body
-Cervinis 2 1/2" Cobra R Hood
-Gloss Black Paint Job
-Custom Paint Job
-Absolutely no rust
-Only a few minor scratches, No dents that im aware of, no cracks or any flaws that stick out.
-All body molding is in show condition, all trim is in phenomenal shape. Glass is in great shape
-8% Tint on Rear windows/Rear Windshield
Interior
-The interior is abolustely flawless. Looks like it came off the show room floor.
-Simpson 5pt Latch Harnesses
-Mac 140MPH White Faced Gauge Cluster
-ALL PHANTOM AUTOMETER GUAGES
-Autometer Phantom Fuel Pressure Guage In Chrome Cup Mounted on the plastic cowl cover.
-Autometer Phantom Boost Gauge Mounted on A-pillar
-2 Autometer Phantom Oil/Water Temp Guages Mounted in a Guage Cage where the stock AC Vents were mounted.
Sound System
Ill sell the whole sound system for $1800.00. Paid over 5gs. I have all paperwork.
-Alpine 78035 Detachable Cd Reciever
-Alpine 3339 Equalizer
-Custom Ported Speaker Box
-2 Alpine 60112CX 12" Subwoofers
-Zeus Hi-F 600watt Amplifier
-2 Alpine 3548 2CH Bridgeable Amplifier
-Alpine 3522 Amplifier
-6.2 Boston SYS Front Door Speakers
-5.5 Boston Rear Speakers
-2 Boston Tweeters
-Phoneix Power Distribution Block
-Phoneix 100A Waffer Fuse
-Phoneix Fuse Block w/ Clear Cover
-Phoneix 225A Waffer Fuse
-2 Phoneix Gold 16Ft RCA Cables
-Phoneix Multi. Input Top Mount
If no one wants to purchase the entire car, I will mainly part out everything, but leaving the cervinis cobra r hood/all wiring/Sway bars/Subframes/Cobra y2k rims and tires/ and the rear end 3:73s,moser 31spline, auburn diff. And depending if you want the sound system or not.
But im thinking of selling the roller for $5k
Clean ass body, no rust or flaws. Won 1st place in Chicagos World of Wheels, and placed the Indianapolis Mustang Show.
Let me know whos intrested in what.
Thanks Alot
Pat
11K OBO TAKES IT HOME NOW!!!!!!
So im entertaining the thought of a part out
Heres the huge list of parts.Everything is either BRAND NEW. Just installed for start up but new, or less than 1000miles.
This is a show winning 1991 Mustang GT with 33,**** original miles. Absolutely no rust, never sees anywhere but in insulated garage. I have reciepts for everything and anything.
I will let the car go as it sits right now for 13kOBO or wil trade for a pretty damn quick mustang.
Parts List. Starting with rear end-engine.
Rear End
-8.8
-Ford Racing 3:73 Ring/Pinion
-Auburn Posi
-Moser 31 Spline 4lug axles
Trans
-T-5
-UPR Double Lock Firewall Adjuster (Brand New-only installed) $25.00
-UPR Adj. Clutch Quadrant (Brand New-only installed) $25.00
-Hurst Short Throw Shifter $120.00 / 140 with knob
-Custom Billet Shift Knob $25.00
-Ford Racing Steel Bearing Retainer (Brand New) $35.00
-Centerforce Throwout Bearing (Brand New) $35.00
-Stock Resurfaced Flywheel by Surge (0miles) $45.00
-Spec Stage II + Clutch/Pressure Plate (500miles)
-Energy Suspension Poly Trans Mount (Brand New) $20.00
-Ford Racing Aluminum Drive Shaft $200.00
-Lakewood Saftey Loop $20.00
-Subframe Connectors $50.00
Everythings bolted up, torqued and properly greased
Freshly Painted/Clearcoated
Fuel
Ill let the complete fuel system go for $1000.00
-Stock Sumped Gas Tank -8 Feed -6 Return
-Bosch 390 Inline Fuel Pump
-10 + 100 Micron Fuel Filters
- -8 13ft Earls Stainless Steel Braided Feed Line (tank - Y-block)- -6 15ft Earls Stainless Steel Braided Return Line (Tank-FPR Fitting)
-Aeromotive Billet Aluminum Y-Block w/fittings
-Aeromotive Adj. FPR 131011 (Boost Ref.) with fittings+guage
-Aeromotive Billet Red Fuel Rails$160 with fittings/lines
-4 (-8 Stainless Steel Braided Rail Feed Lines) Both Rails are feed in back and go out both front an fittings.
-All Fittings
Everything is Mounted and Routed
Motor
Ill sell the motor complete from oil pan to upper intake starting at $2200.00 then ill add in if you want the water pump/alt/brackets/ ect.
91 302 with factory forged internals (33,*** original miles) Unmolested
-Pained Ford Racing Blue $300.00
Pan to intake
-Energy Suspension Poly-Motor Mounts (only a few hundred miles) $80.00
-Moroso 7qt Rear Sump Oil Pan $175.00
-Melling HV Oil Pump (200miles) $30.00
-Ford HD Oil Pump Shaft (Brand New) $15.00
-Ford Racing M-6250-E303 Camshaft $140.00
-Edelbrock Stage 1 Aluminum Heads (lg Intake) $1200.00
-Manley 25625 6.250 Chromeoly Harded Pushrods (200miles) $ 120.00
-Ford Racing 1.72 Rockers M-6564-D351 $ 200.00
-Ford Racing Custom Sheetmetal Valvecovers $100.00
-Edelbrock Performer 3828 Upper/Lower Intake $300.00
-Edelbrock/BBK 70mm TB EDL-3825 $140.00
ACC.
-Ford Racing Hi Torq./Mini Starter (200miles) $100.00
-Power Master Alternator 8-47100 (100miles) $90.00
-March Chrome Adj. Alternator Bracket (Brand New) $40.00
-2 K & N Oil Filter HP-2004 (Brand New) $11.00 Each
-8 NGK V-Power Spark Plugs (Brand New) $15.00
PowerAdder
-Cartech Sreet Sleeper Turbo Kit
Kit Includes
Will sell whole kit for $2000.00
Kit + MAF/INJ $2500.00
1 3/4" T304 Stainless Turbo Header (ceramic coating)
1 5/8" Passanger-Side Header
3" Downpipe (Heat Wrapped)
2 1/4" Crossover Tube
2 1/4" Y-Pipe with Ball Flanges
2 1/4" Black Powder Coated Intercooler Piping
3" Bar-Plate Intercooler (vertical charge flow)
12psi bypass valve
Silicon Intercooler Hoses
All t-bolt Clamps Brand New
-Percision 60mm t-4 Turbo (FRESH) 0 MILES!!!
-StainlessSteel Braided Oil Feed
-(-6 Braided Oil Drain Hose with both an fittings
-Drivers Side Header (hotside)
-Passenger Side Header (cold side)
-Turbonetics RaceGate
-Bosch Recirculating Valve
-Manual Boost Controller
-Lucas 42lbers (excellent shape) $200.00
-Pro-M 3" Protube Cal'd for 42lbers (excellent shape) $200.00
All Pipes were coated in VHT 1600Degree High Temp Paint, Then Wrapped in Fiberglass Exhaust Wrap.
Ignition
-Stock Motorcraft Dizzy $40.00
-MSD Cap+Rotor (200 miles) $15.00
-MSD 8.5mm Super Conductor Wires (Brand New-just installed) $40.00
-MSD 6BTM MSD-6462(Only 200miles) LooksBrand New $300.00
-MSD Ignition HVC Ignition Coil MSD-8227(200miles) $30.00
-MSD Ignition Coil Harness MSD-8874(200miles) $12.00
Cooling
I'll let the whole cooling system go for $420.00
-31" x 19" Custom Aluminum Radiator (200miles) $200.00
-Flex-a-lite 210 Dual 12" Sucker Low Profile Electric Fans w/adj Thermo (200miles) $220.00
-Trick Flow 3 x 8 Polished Chrome Coolant Overflow Tank (200miles) $35.00
-Edelbrock Victor Jr. Aluminum Water Pump (200miles) $130.00
Suspension
-Saleen 2" Front+Rear Lowering Spings
-Lakewood 70/30 Front Struts
-Custom Painted Red Front/Rear Swaybars
-Energy Suspension Front Sway Bar End links (BRAND NEW) $20.00
-BBK Upper/Lower Rear Control Arms
-Subrame Connectors
Wheels
-18" Cobra y2k Chrome Rims 4-lug (Flawless)
-Nitto NT555 Tires (Only Near 1,000miles on them)
Body
-91GT Body
-Cervinis 2 1/2" Cobra R Hood
-Gloss Black Paint Job
-Custom Paint Job
-Absolutely no rust
-Only a few minor scratches, No dents that im aware of, no cracks or any flaws that stick out.
-All body molding is in show condition, all trim is in phenomenal shape. Glass is in great shape
-8% Tint on Rear windows/Rear Windshield
Interior
-The interior is abolustely flawless. Looks like it came off the show room floor.
-Simpson 5pt Latch Harnesses
-Mac 140MPH White Faced Gauge Cluster
-ALL PHANTOM AUTOMETER GUAGES
-Autometer Phantom Fuel Pressure Guage In Chrome Cup Mounted on the plastic cowl cover.
-Autometer Phantom Boost Gauge Mounted on A-pillar
-2 Autometer Phantom Oil/Water Temp Guages Mounted in a Guage Cage where the stock AC Vents were mounted.
Sound System
Ill sell the whole sound system for $1800.00. Paid over 5gs. I have all paperwork.
-Alpine 78035 Detachable Cd Reciever
-Alpine 3339 Equalizer
-Custom Ported Speaker Box
-2 Alpine 60112CX 12" Subwoofers
-Zeus Hi-F 600watt Amplifier
-2 Alpine 3548 2CH Bridgeable Amplifier
-Alpine 3522 Amplifier
-6.2 Boston SYS Front Door Speakers
-5.5 Boston Rear Speakers
-2 Boston Tweeters
-Phoneix Power Distribution Block
-Phoneix 100A Waffer Fuse
-Phoneix Fuse Block w/ Clear Cover
-Phoneix 225A Waffer Fuse
-2 Phoneix Gold 16Ft RCA Cables
-Phoneix Multi. Input Top Mount
If no one wants to purchase the entire car, I will mainly part out everything, but leaving the cervinis cobra r hood/all wiring/Sway bars/Subframes/Cobra y2k rims and tires/ and the rear end 3:73s,moser 31spline, auburn diff. And depending if you want the sound system or not.
But im thinking of selling the roller for $5k
Clean ass body, no rust or flaws. Won 1st place in Chicagos World of Wheels, and placed the Indianapolis Mustang Show.
Let me know whos intrested in what.
Thanks Alot
Pat
