i would run this thing into shit. everywhere.
http://cgi.ebay.com/ebaymotors/LAND...7458589?pt=US_Cars_Trucks&hash=item27c157741d
THIS IS NOT YOUR ORDINARY 89 RANGE ROVER, THIS IS NOT YOUR ORDINARY DUNE BUGGY, THIS IS ONE SERIOUS ROCK CRAWLER (STREET LEGAL FOR FOR EVERYDAY PLEASURE IF YOU PREFER) OVER $25K INVESTED. LISTED BELOW ARE THE FOLLOWING MODS;
-3.9 ltr. fuel injected V-8 with Headman headers, aftermarket catalytic converters, Flow Master muffler. Automatictransmission.
-Optima battery
-Warn 9.5 ti winch with synthetic line
-Hella off road lights
-LT230 transfer case from Discovery with long spline output shaft.
-Rebuilt Discovery series 2 double cardon front driveshaft
-Custom built double cardon 1310 u-joint rear drive shift with Ā¼ā wall dom tubing
-Custom fabricated Ford 9ā disc brake rear end with 35 spline Moser axle shafts, Detroit locker, Strange nodular housing, 4.75 to 1 Richmond ring and pinion gears. Spidertrax housing (3/8ā tube wall thickness) . 5 on 5 bolt pattern with custom made wheel adapters to fit Rover bolt pattern of 5 on 6.5. Summit racing brake proportioning valve.
-Front axle has 4.75 reverse cut gears with an ARB air locker assembled by Great Basin Rovers. Axle shafts and cv joints are from Rovertracks (made by Longfield) with 30/24 spline inner axle shafts. Great Basin HD drive flanges at the wheels.
-5 inch Rovertym springs all around. Rovertym johnny joint rear links. Front radius arms custom made. Bilstein 7100 remote reservoir short body shocks- 12ā in front, 14ā in rear
-PSC Motorsports High performance steering pump and hydraulic ram assist at the pitman arm. Brand new oem steering box from dealer. Heavy duty Rovertracks drag link. Heavy duty Rovertym track bar moved to the front made possible by a RH drive swivel housing.
- Custom made 3/8ā steel belly pan. Custom made front bumper and skid plate. LED tail lights.
-New oil cooler and tranny lines.
-Uniden 2 way radio
-Gas tank relocated.
-15x10 Trailready beadlock wheels with 37/12.5/15 Goodyear MT/Rās
-1.5ā diameter .120ā wall HREW round steel tube roll cage and front bumper.
-Rear has been bobbed by about a foot.
-Has engine driven compressor for airing up tires.
PLEASE IF YOU HAVE QUESTIONS CALL ME 918 804 2200. I AM A LICENSED OKLAHOMA DEALER, I D