boost leash electronics

[tinosc281]

is anybody using the boost leash electronics boost controller.how does it perform.how complicated to install .anyone familiar with tuning the unit.looking to pick one up for my turbo mustang.opinions welcome

Click to read more...

 

[willizm]

I have one and really like it. I was a bit skeptical as the instructions are a bit more involved than your standard controller but it's awesome. If you have a tbrake or plan on getting one in the near future make sure you get the pulse/boost combo. This way you can tie your brake into the controller and use it to stage up easy. The setup is pretty easy as well. Any questions, just ask

 

[tinosc281]

i do have a trans brake.i am planning on getting the combo unit.i am not familiar with turbo cars.this is my first turbo car and want something that works good and simple to use.i have purchase the msd boost controller but it seems it is hard to use.did not install in my car.was told boost leash is simpler and easier to use.

 

[chet3310]

I run the boost controller and bump box. Both units installations were plug and play, and are very easy to use on the fly. Randy will also stand behind any of his products. To me, hands down better then any others for the price.

 

[Sprayed 01]

Randy is great, boost leash works very well. I used compressed air and a very light spring in the wg. I can have 3lbs or 50lbs.

 

[Handsome Jesus]

I also use a leash boost/pulse combo.

Works great, you won't be disappointed. the only thing I don't like is the little plastic boost/CO2 sensor. upgrade to the billet one costs $, but probably worth it. It didn't exist when I put mine together.

 

[willizm]

Are any of you guys running the two boost/vac sources to the wastegate cap like the instructions recommend or just t-ing them together and going into a single port on the WG?

 

[Formula_LS1]

I run it also with CO2...super easy to use and works great. Randy is awesome when it comes to support

Are any of you guys running the two boost/vac sources to the wastegate cap like the instructions recommend or just t-ing them together and going into a single port on the WG?

Mine is setup like that