1.9 modified rockers

[Genvgtp]

i have a 2005 gtp comp g with a dp tune 3.5 pulley 180tstat and autolite 103s how much would rockers help me

Click to read more...

 

[TonzKnock-G]

Just a lil something on the top end. Do you ever plan on putting a cam in ? If yes dont do rockers.

 

[Genvgtp]

well id like to but cant afford it this winter though i was thinking of twincharged setup

 

[Mook]

If you can't afford a cam you won't be able to afford twincharging...

But to answer your question, rockers are a good alternative to a cam.

 

[Genvgtp]

well i could afford the cam if really wanted but im leaving for vacation in june

 

[Genvgtp]

and is prj a good tuner

 

[Yaj Yak]

id trust prj with any of my stuff i think...

103s seems pretty cold for your setup also.

 

[Mook]

Didn't notice the 103s. Agreed on too cold.

 

[Genvgtp]

thats what paul from prj told me to go with

 

[Genvgtp]

what mods would i need to run a 3.2 or3.0

 

[TonzKnock-G]

Just find a used turbo setup and call it a day!

You would need a IC or cam or both.....

The 04+gtps are more bitchy..

 

[Genvgtp]

ya ive come to realize its easier to mod the 97-03 gtp than it is the 04+

 

[GTwolf]

If you can't afford a cam rockers are a pretty good mod. Agreed on the 103's being too cold for your setup. I'm sure PRJ is good but I bet the guys on here are better (fastkatt, 10sec). Someone correct me if I'm mixing up my years/computers but I think for the 05 models you can just swap in an 04 PCM and it's much easier to tune. Confirm that with someone else on here though.

 

[TonzKnock-G]

I'm pretty sure 05 pcms are fine. I'd say that with rockers, dp, and a good tune you might be able to run a 3.4 pulley. Gotta scan to be sure.

 

[smug]

just do an IC or a cam and be some what quick

 

[DOC-Z]

I happen to have a set of Intense 1.9's for sale in the "For Sale" forum (Total GTP DE-MOD)....

...HOWEVER...if you are planning on going as far as you previously stated, then you should wait and get it all at one time and do it right. As much as I would like to sell the rockers, you shouldn't buy them. Go with the cam and you'll be a HE** of a lot happier!

That being said, I do have a ZZP 3.5 pulley (no hub) for sale. If you're interested, make an offer.

 

[xringshooter7]

I have noticed a little more on the top end, but the main thing is the driveability of the car is night and day. If you think you may go to a cam, save your time and just do a cam first off...i wish that's what i did

 

[The Broken Regal]

After driving a cammed car after driving my own and racing the same car, hands down a cam is a better idea, but for the cost, a cam is much more expensive for the install, rockers are pretty easy and straightforward

just keep what you got and save for a turbo kit or IC

 

[1quick]

if you plan to go fast, just turbo it and save yourself the time and money