How to fix this!?

[firemandan1700]

So today before I went to work, I scraped my windows and totally forgot about knocking the wiper blades loose, I turned on the wiperblades and heard a pop and only the driverside was moving and working... The passenger side I knocked loose but it only twitched.

I have never had to deal with an issue like this. Where do I start what do I need. I am at work now so I can't look at it. Just want a heads up so I can fix it first thing when I get off work lol

Isn't there some cross arm that moves the passenger side?

Click to read more...

 

[SuperDaveGSE]

Pop the end cap off the wiper blade arm and tighten down the bolt, that is after you make sure the wipers are off and in the park position.

 

[firemandan1700]

I'll try this when I go home. Thank you!

 

[frosty23_45]

Might have stripped the splines on the wiper arm, happened to my driver side last year. I got a replacement from a junk yard for $5.

 

[Bob Kazamakis]

I'd just tighten it down like suggested above. Most likely it'll be ok.

 

[99PONTIACGP]

Pop the end cap off the wiper blade arm and tighten down the bolt, that is after you make sure the wipers are off and in the park position.

I'd just tighten it down like suggested above. Most likely it'll be ok.

There was another thread on this and it solved the problem.

 

[Turbocharged400sbc]

if it went through only one swipe your prob fine retightening it, if it actuated a few times the arm is likely ovaled

 

[firemandan1700]

Nothing serious. Pop the cap off as stated took a 13mm socket snugged it and volia all fixed!