Stock TB

[Xtant12]

I was just wanting to ask everyone if they had or could look out for a Stock TB for a 99-03 GTP. I must replace mine soon and I really need to find one. Thanks guys.

Click to read more...

 

[Sinister Drag Designs]

Do you just need to replace your sensors or do you need the entire TB? Whats wrong with yours?

 

[Xtant12]

Yes I need a new one because we did the alkey kit and drilled into it to attach the hose for the methanol

 

[Yaj Yak]

....why don't you just plug the hole?

 

[02BlueGT]

....why don't you just plug the hole?

I have a 99+ L36 TB that you can purchase.... but it's several mm smaller

 

[10sec]

Alcohol injection before the blower is useless. Post blower FTW, also x2 with kj i would just plug it. If you decide you still want a throttle body i have one. I'll sell it for the going rate of a stock throttle body whatever that may be.

 

[Ron Vogel]

Why people don't drill and tap the unused boss below the evap port is beyond me. If you need it fixed, I have a special epoxy to do it. It takes about 36 hours to cure, but it's permanant, and will be stronger than the actual aluminum...Devcon FTW.

 

[10sec]

Why people don't drill and tap the unused boss below the evap port is beyond me. If you need it fixed, I have a special epoxy to do it. It takes about 36 hours to cure, but it's permanant, and will be stronger than the actual aluminum...Devcon FTW.

I'll be done with my top secret alky setup mid next week with vids and pics, i'm going to pm you. This has Ron Vogal creativity written all over it. Worked absolutely perfect on a bench test :smile: