3800 wtb: rockers, pushrods, and valve springs

[gtpdriver7]

like the title says im lookin for some rockers pushrods and valve springs. wanting to run a 3.2 asap and ive been told to add these before the 3.2.

thanks,
Dom

Click to read more...

 

[got3800.com]

good playin it safe...blowing cars up is not fun...ill let you know if i hear anything. let me know if you need help with install....may have to buy a tool or 2 before so give me the heads up

 

[PANDA]

There is no set list of what you need to run a certain pulley. Some people get away with less, some people have to mod more. Scan, scan, scan. I would suggest to buy a tuner if you already don't have one. A bigger pulley with more timing will make more power than a smaller pulley with KR.

 

[gtpdriver7]

<div class='quotetop'>QUOTE (got3800.com @ Mar 26 2008, 09:18 PM) <{POST_SNAPBACK}></div>

good playin it safe...blowing cars up is not fun...ill let you know if i hear anything. let me know if you need help with install....may have to buy a tool or 2 before so give me the heads up[/b]

alright man thanks a lot.

 

[phat_ridegt]

fwiw,

a pulley is NOT the correct way to classify your mods.

you will want to add a set of 1.9 rockers, which will drop your boost, and you will drop pullies after tuning out any KR you currently have. your pulley drop is to regain the boost you lost. unless you are going to run race gas, just upping the boost isnt going to get you anywhere (and this isnt a great idea either....)