<div class='quotetop'>QUOTE (Ron Vogel @ Mar 25 2008, 03:32 PM) <{POST_SNAPBACK}></div>
let me know if you have a good 3.2 pulley belt that your trying to get rid of....
let me know if you have a good 3.2 pulley belt that your trying to get rid of....
<div class='quotetop'>QUOTE (Ron Vogel @ Mar 25 2008, 04:33 PM) <{POST_SNAPBACK}></div>
Thank you sir.
Thank you sir.
I
imported_Ron Vogel
Guest
<div class='quotetop'>QUOTE (got3800.com @ Mar 28 2008, 12:11 PM) <{POST_SNAPBACK}></div>
Napa/Gates: 060XXX
Goodyear: 4060XXX
Dayco: 5060XXX
Duralast: XXXK6
No IC
Grand Prix
3.8 (Stock): 665
3.2-3.5: 660
2.85-3.1: 650
2.7-2.85: 642
Bonneville
Stock: 721
3.4: 716
With ZZP Stage 2 IC (2.25” tall Core)
6 Rib
3.3-3.8: 685
2.7-3.2: 680 (Note that the NAPA 680 may be too long for 2.8" and smaller. Try a NAPA 672)
2.5-2.6: 672
8 Rib NOTE: For these belts the part numbers are 080 rather than 060...or K8 with the Duralast rather than K6.
3.0-3.2: 685
2.6-2.9: 680
Gen 5 Blower
2.9-3.1: 685
2.7-3.0: 680
2.4-2.6: 675
With ZZP Stage 3 IC (??? tall Core)
6 Rib:
3.1-3.8: 685
2.6-3.0: 680
Gen 5 Blower
3.0-3.8: 685
2.6-2.9: 680
2.3-2.55: 675
Gen 5 Blower with ATI 10% overdrive balancer
2.8: 695
With ZZP SSIC (1” tall Core)
3.2-3.8: 670
3.0-3.1: 667 (Stock belt)
2.8: 660
With MAP IC (2.0” tall Core)
3.1-3.4: 680
2.8-3.0: 672
With WBS IC (1.91” tall Core)
No information currently. MAP IC belt reference would be close but the belts listed there will be a bit long for some applications with the WBS IC.
With Thrasher IC (2.5” tall Core)
2.8: 672
3.0: 680
ZZP SS M90 Conversion
k060970 - SS M90 for 97/98
K060950 - SS M90 for 99+
Other Belts
060915 - Stock accessory belt for 99-03
-also works with either UD WP pulley or OD alt pulley but not both.
060905 - Stock Accessory belt for 04+
060923 - Accessory belt for 99+ with UD WP pulley and alt UD pulley.
4060935 - Stock accessory belt for 97/98 (94").
4060938 - Accessory belt for 97/98 with underdrive pulleys.
Part Number Examples
Napa/Gates: 060XXX
Goodyear: 4060XXX
Dayco: 5060XXX
Duralast: XXXK6
No IC
Grand Prix
3.8 (Stock): 665
3.2-3.5: 660
2.85-3.1: 650
2.7-2.85: 642
Bonneville
Stock: 721
3.4: 716
With ZZP Stage 2 IC (2.25” tall Core)
6 Rib
3.3-3.8: 685
2.7-3.2: 680 (Note that the NAPA 680 may be too long for 2.8" and smaller. Try a NAPA 672)
2.5-2.6: 672
8 Rib NOTE: For these belts the part numbers are 080 rather than 060...or K8 with the Duralast rather than K6.
3.0-3.2: 685
2.6-2.9: 680
Gen 5 Blower
2.9-3.1: 685
2.7-3.0: 680
2.4-2.6: 675
With ZZP Stage 3 IC (??? tall Core)
6 Rib:
3.1-3.8: 685
2.6-3.0: 680
Gen 5 Blower
3.0-3.8: 685
2.6-2.9: 680
2.3-2.55: 675
Gen 5 Blower with ATI 10% overdrive balancer
2.8: 695
With ZZP SSIC (1” tall Core)
3.2-3.8: 670
3.0-3.1: 667 (Stock belt)
2.8: 660
With MAP IC (2.0” tall Core)
3.1-3.4: 680
2.8-3.0: 672
With WBS IC (1.91” tall Core)
No information currently. MAP IC belt reference would be close but the belts listed there will be a bit long for some applications with the WBS IC.
With Thrasher IC (2.5” tall Core)
2.8: 672
3.0: 680
ZZP SS M90 Conversion
k060970 - SS M90 for 97/98
K060950 - SS M90 for 99+
Other Belts
060915 - Stock accessory belt for 99-03
-also works with either UD WP pulley or OD alt pulley but not both.
060905 - Stock Accessory belt for 04+
060923 - Accessory belt for 99+ with UD WP pulley and alt UD pulley.
4060935 - Stock accessory belt for 97/98 (94").
4060938 - Accessory belt for 97/98 with underdrive pulleys.
<div class='quotetop'>QUOTE (got3800.com @ Mar 28 2008, 04:43 PM) <{POST_SNAPBACK}></div>
660 = length of belt in inches, i.e. if you started at one point then measured all the way around the belt back to the starting point. Beats me how that equates to Ron's lengths.
660 = length of belt in inches, i.e. if you started at one point then measured all the way around the belt back to the starting point. Beats me how that equates to Ron's lengths.
I
imported_Ron Vogel
Guest
<div class='quotetop'>QUOTE (Silvapain @ Mar 28 2008, 08:42 PM) <{POST_SNAPBACK}></div>
660 = length of belt in inches, i.e. if you started at one point then measured all the way around the belt back to the starting point. Beats me how that equates to Ron's lengths.
[/b][/quote]
You mean all the 72's and 74"s?
660 = length of belt in inches, i.e. if you started at one point then measured all the way around the belt back to the starting point. Beats me how that equates to Ron's lengths.
[/b][/quote]
You mean all the 72's and 74"s?
<div class='quotetop'>QUOTE (Ron Vogel @ Mar 28 2008, 10:07 PM) <{POST_SNAPBACK}></div>
660 = length of belt in inches, i.e. if you started at one point then measured all the way around the belt back to the starting point. Beats me how that equates to Ron's lengths.
[/b][/quote]
You mean all the 72's and 74"s?
[/b][/quote]
Whoops, I meant the belt length is 66.0", not 660". I am used to thinking about them in metric lengths, and I forgot they are measured in mm, not cm, in metric. It didn't even occur to me that 660" is 55'.
660 = length of belt in inches, i.e. if you started at one point then measured all the way around the belt back to the starting point. Beats me how that equates to Ron's lengths.
[/b][/quote]
You mean all the 72's and 74"s?
[/b][/quote]
Whoops, I meant the belt length is 66.0", not 660". I am used to thinking about them in metric lengths, and I forgot they are measured in mm, not cm, in metric. It didn't even occur to me that 660" is 55'.
I
imported_Ron Vogel
Guest
Thread Info
-
ICreated
-
18Replies
-
612Views
-
Participants list