3800 3.4 pulley installer needed

[smknL67]

I have a 3.4 pulley that has been sitting here in my house and I've been debating on wether or not I should buy a puller or not. I don't think that I'm gonna go with a smaller pulley than a 3.4 so I'm looking for someone to help me do my swap or do it for me. If anybody is down for this tell me how much $$$ or If I can rent a puller that would work out too. As long as I get my pulley on quick....Who can help out?

Click to read more...

 

[preussenGTP]

I'll make you a deal - you come over here (willow springs) and we'll do yours then mine. I have a 3.3 i've been meaning to put on but need some help.
A pulley job is a two man operation

 

[Fish]

Originally posted by preussenGTP@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

 

[imported_1fastGTP]

Originally posted by Fish+Jul 27 2006, 12:26 AM-->

<!--QuoteBegin-preussenGTP

@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

[snapback]133324[/snapback]​

[/b]

im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

 

[preussenGTP]

Originally posted by 1fastGTP@Jul 27 2006, 03:34 AM


im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

[snapback]133329[/snapback]​

Yea dood - you're welcome to use the puller. Just gimme a hand with my pulley.
I'm a weak old man with a bad back

 

[MIKES3]

Originally posted by 1fastGTP+Jul 27 2006, 02:34 AM-->

Originally posted by Fish@Jul 27 2006, 12:26 AM
<!--QuoteBegin-preussenGTP

@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

[snapback]133324[/snapback]​

im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

[snapback]133329[/snapback]​

[/b]

jeeez. Just make it an all out pully orgy. Then again I'm getting my 3.2 installed tonight.

 

[TonzKnock-G]

Originally posted by MIKES3+Jul 27 2006, 08:42 AM-->

Originally posted by 1fastGTP@Jul 27 2006, 02:34 AM

Originally posted by Fish@Jul 27 2006, 12:26 AM
<!--QuoteBegin-preussenGTP

@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

[snapback]133324[/snapback]​

im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

[snapback]133329[/snapback]​

jeeez. Just make it an all out pully orgy. Then again I'm getting my 3.2 installed tonight.

[snapback]133336[/snapback]​

[/b]

Hey Mike dont you have a MPS?

SmknL67 what area do you live in? I just returned the ZZP puller yesterday!

 

[MIKES3]

Originally posted by tonzcompg04+Jul 27 2006, 09:23 AM-->

Originally posted by MIKES3@Jul 27 2006, 08:42 AM

Originally posted by 1fastGTP@Jul 27 2006, 02:34 AM

Originally posted by Fish@Jul 27 2006, 12:26 AM
<!--QuoteBegin-preussenGTP

@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

[snapback]133324[/snapback]​

im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

[snapback]133329[/snapback]​

jeeez. Just make it an all out pully orgy. Then again I'm getting my 3.2 installed tonight.

[snapback]133336[/snapback]​

Hey Mike dont you have a MPS?

SmknL67 what area do you live in? I just returned the ZZP puller yesterday!

[snapback]133342[/snapback]​

[/b]

I have a MPS, but its not installed. I have a 3.4 press on as of right now

 

[imported_1fastGTP]

Originally posted by MIKES3+Jul 27 2006, 08:42 AM-->

Originally posted by 1fastGTP@Jul 27 2006, 02:34 AM

Originally posted by Fish@Jul 27 2006, 12:26 AM
<!--QuoteBegin-preussenGTP

@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

[snapback]133324[/snapback]​

im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

[snapback]133329[/snapback]​

jeeez. Just make it an all out pully orgy. Then again I'm getting my 3.2 installed tonight.

[snapback]133336[/snapback]​

[/b]

ok CHAD! learn to spell pulley! haha just busten your balls mike.

 

[alexgtp]

its a 1 man job. I will never foget doing some kids pulley swap who llived in skokie in under 10 minutes..LOL!! I had a movie to catch

 

[imported_Ron Vogel]

Originally posted by alexgtp@Jul 27 2006, 03:43 PM
its a 1 man job. I will never foget doing some kids pulley swap  who llived in skokie in under 10 minutes..LOL!! I had a movie to catch

[snapback]133382[/snapback]​

I've never done one that quick. I usually get ahold of cursed cars that everything is hard to do on.

 

[Sinister Drag Designs]

h34r:

 

[preussenGTP]

Originally posted by alexgtp@Jul 27 2006, 04:43 PM
its a 1 man job. I will never foget doing some kids pulley swap  who llived in skokie in under 10 minutes..LOL!! I had a movie to catch

[snapback]133382[/snapback]​

i doubt that - but whatever...

i've done at least 10 pulley swaps and even under ideal conditions it's nearly impossible to this in under 20 minutes.

Shaun when do ya wanna do this? smknL67? Keeping in mind it's best to remove a pulley on a cold snout. We could change my pulley first; By the time mine gets done your engines should be sufficiantly cooled off to work on.

 

[imported_1fastGTP]

Originally posted by preussenGTP+Jul 27 2006, 06:00 PM-->

<!--QuoteBegin-alexgtp

@Jul 27 2006, 04:43 PM
its a 1 man job. I will never foget doing some kids pulley swap  who llived in skokie in under 10 minutes..LOL!! I had a movie to catch

[snapback]133382[/snapback]​

i doubt that - but whatever...

i've done at least 10 pulley swaps and even under ideal conditions it's nearly impossible to this in under 20 minutes.

Shaun when do ya wanna do this? smknL67? Keeping in mind it's best to remove a pulley on a cold snout. We could change my pulley first; By the time mine gets done your engines should be sufficiantly cooled off to work on.

[snapback]133408[/snapback]​

[/b]

ummm whenever my buddy is off or i guess we can do it when we all get off work as long as we have light. ill ask him and then ill let you know.

 

[imported_PaceCarBoozer]

Originally posted by Ron Vogel+Jul 27 2006, 05:53 PM-->

<!--QuoteBegin-alexgtp

@Jul 27 2006, 03:43 PM
its a 1 man job. I will never foget doing some kids pulley swap  who llived in skokie in under 10 minutes..LOL!! I had a movie to catch

[snapback]133382[/snapback]​

I've never done one that quick. I usually get ahold of cursed cars that everything is hard to do on.

[snapback]133405[/snapback]​

[/b]

you could be going for a record of broken studs for a week doing Mike's car

 

[Fish]

Originally posted by preussenGTP+Jul 27 2006, 06:00 PM-->

<!--QuoteBegin-alexgtp

@Jul 27 2006, 04:43 PM
its a 1 man job. I will never foget doing some kids pulley swap  who llived in skokie in under 10 minutes..LOL!! I had a movie to catch

[snapback]133382[/snapback]​

i doubt that - but whatever...

i've done at least 10 pulley swaps and even under ideal conditions it's nearly impossible to this in under 20 minutes.

Shaun when do ya wanna do this? smknL67? Keeping in mind it's best to remove a pulley on a cold snout. We could change my pulley first; By the time mine gets done your engines should be sufficiantly cooled off to work on.

[snapback]133408[/snapback]​

[/b]

Until you know who you are talking to, Id listen to what he says.

Alex has done hundreds......HUNDREDS of pulley swaps. It is cool watching him pound beer while doing swaps.

 

[smknL67]

Originally posted by tonzcompg04+Jul 27 2006, 09:23 AM-->

Originally posted by MIKES3@Jul 27 2006, 08:42 AM

Originally posted by 1fastGTP@Jul 27 2006, 02:34 AM

Originally posted by Fish@Jul 27 2006, 12:26 AM
<!--QuoteBegin-preussenGTP

@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

[snapback]133324[/snapback]​

im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

[snapback]133329[/snapback]​

jeeez. Just make it an all out pully orgy. Then again I'm getting my 3.2 installed tonight.

[snapback]133336[/snapback]​

Hey Mike dont you have a MPS?

SmknL67 what area do you live in? I just returned the ZZP puller yesterday!

[snapback]133342[/snapback]​

[/b]

I live in Bensenville but I do know where willow springs is at. I used to work out there in UPS when I was in h.s. Sounds good to me to help you with your pulley and then mine. I did do a pulley swap in my old 92 park avenue in under 10 min. , but thats a totally different type of blower (m62) It was a zzp 2.5 pulley B) .....anyways does the weekend work for you? Right now I'm working 12hr days at work and the weekend is my only free time.

 

[preussenGTP]

Originally posted by smknL67@Jul 28 2006, 02:37 AM

I live in Bensenville but I do know where willow springs is at. I used to work out there in UPS when I was in h.s. Sounds good to me to help you with your pulley and then mine. I did do a pulley swap in my old 92 park avenue in under 10 min. , but thats a totally different type of blower (m62) It was a zzp 2.5 pulley B) .....anyways does the weekend work for you? Right now I'm working 12hr days at work and the weekend is my only free time.

[snapback]133464[/snapback]​

I live on Archer not too far from UPS

This weekend will be tricky.. I'll have to figure out what my schedule is.
Then again it's only a ten minute job

 

[Fish]

LOL, ok dude. You do something for over 5 years and tell us how you learn little tricks to cut time down.

The first time I saw Alex do a swap was back in 02 and it took roughly 20 minutes. That was with bullshitting and messing around. Then again, you think its a 2 man job.

Did you know it only takes 4 hours to do a complete motor swap?? Thats the fastest time ive seen it done in so it must be normal.

 

[alexgtp]

I used to be the pulley swap master..LOL!!

Until I retired my title..LOL~~

I have been working on GP's since early 99. Done hundreds of pulley swaps lost track after doing 10 in a row at GPG in Kansas. I remember even doing that one pulley that was actually a compression fitting type pulley . I wonder what ever happened to those..LOL!! They probably flew off.

I have done thrasher,pulley boys,zzp,intense, even the original 3.5 pullies. all the Hub type systems. even done a cple Mag snouts (including my own because my first pulley swap was a disaster that took 4 hours only to fock it up..LOL ahh those were the good old days)

So yes I have actually done a cple swaps that took 10 minutes.
If all goes well.


Shit i think we even coinded the phrase 3.4" shit grin..LOL~~

 

[MrT]

Originally posted by alexgtp@Jul 28 2006, 11:44 AM
(including my own because my first pulley swap was a disaster that took 4 hours only to fock it up..LOL ahh those were the good old days)

[snapback]133493[/snapback]​

i can't remember WHY is was sooooo FUBAR, but that was a pretty sad attempt - LOL B)

 

[Xtant12]

Originally posted by MIKES3+Jul 27 2006, 08:42 AM-->

Originally posted by 1fastGTP@Jul 27 2006, 02:34 AM

Originally posted by Fish@Jul 27 2006, 12:26 AM
<!--QuoteBegin-preussenGTP

@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

[snapback]133324[/snapback]​

im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

[snapback]133329[/snapback]​

jeeez. Just make it an all out pully orgy. Then again I'm getting my 3.2 installed tonight.

[snapback]133336[/snapback]​

[/b]

thats it is mike...3.2... Mike sucks... Ill be thinking of you when I get the 3.0 on mike.. I'll even give you a pic so you can look at it all day on your computer... ( Until you exchange it )... :lolsign:

 

[MIKES3]

Originally posted by Xtant12+Jul 28 2006, 01:57 PM-->

Originally posted by MIKES3@Jul 27 2006, 08:42 AM

Originally posted by 1fastGTP@Jul 27 2006, 02:34 AM

Originally posted by Fish@Jul 27 2006, 12:26 AM
<!--QuoteBegin-preussenGTP

@Jul 27 2006, 12:12 AM
A pulley job is a two man operation

[snapback]133323[/snapback]​

[snapback]133324[/snapback]​

im guessing for when one gets tired the other can take over!? haha hey my buddy also needs a pulley put on mind if we tagged along?

[snapback]133329[/snapback]​

jeeez. Just make it an all out pully orgy. Then again I'm getting my 3.2 installed tonight.

[snapback]133336[/snapback]​

thats it is mike...3.2... Mike sucks... Ill be thinking of you when I get the 3.0 on mike.. I'll even give you a pic so you can look at it all day on your computer... ( Until you exchange it )... :lolsign:

[snapback]133508[/snapback]​

[/b]

It's all good. When I am ready to drop the next pulley size it will be a 2.8 with stage 2 heads. Next summer. How ya been anyways? PM me

 

[preussenGTP]

So when are we gonna do this? ?

 

[smknL67]

I'll call you today dude. Hope we can meet up