98 Stock air box with rubber elbow
L67 engine tensioner assembly (surface rust on pulley)
Brand new Dayco engine tensioner pulley
M90 tensioner
3 plastic ribbed pulleys (I think idler)
2 plastic smooth pulleys (3" diameter, idler right?)
1 metal smooth pulley (3" diameter, idler right?)
Stock GTP front Brake Brackets
2 Valve Cover Oil Necks and Caps
Wiring harness that runs to coil packs
L67 Engine Cover
Bent L67 Fuel rails (good for custom project, IC modifications)
Passenger Headlight without lense
Custom CAI box, made by me. Fits 4" x 9" cone very tightly. Drilling required to hold the box to the car. Wrapped with reflective adhesive (quality stuff, not autozone). Picture seen here. Requires 45* street elbow from hardware store.
Used K&N 9" cone with 4" inlet flange. Burnt spots, but not burnt through. Needs refreshed. Perfect for CAI box
3 Mild steel 2.5" 90* mandrel bent tube. (either 16 or 18 gauge)
Mild steel 2.75" mandrel bent U-bend
Mild Steel smooth 2.5" x 3.5" transition
EGR Valve
Used 660 Gator Back Belt (In great condition)
2 L67 MAP sensor brackets
Aluminum alternator to supercharger bracket
Also, I beleive i have a black alternator to supercharger bracket for a different year car. Unsure if thats actually what this bracket is.
Yea thats about it. I can take pictures of everything. If you are interested in anything please make a post. If its a reasonable price, then youll get it. UPS shipping from 50014. Highest price will be taken if more than one person is interested in an item. I can take pictures of all items. If you have any questions please let me know. Thank you.
L67 engine tensioner assembly (surface rust on pulley)
Brand new Dayco engine tensioner pulley
M90 tensioner
3 plastic ribbed pulleys (I think idler)
2 plastic smooth pulleys (3" diameter, idler right?)
1 metal smooth pulley (3" diameter, idler right?)
Stock GTP front Brake Brackets
2 Valve Cover Oil Necks and Caps
Wiring harness that runs to coil packs
L67 Engine Cover
Bent L67 Fuel rails (good for custom project, IC modifications)
Passenger Headlight without lense
Custom CAI box, made by me. Fits 4" x 9" cone very tightly. Drilling required to hold the box to the car. Wrapped with reflective adhesive (quality stuff, not autozone). Picture seen here. Requires 45* street elbow from hardware store.
Used K&N 9" cone with 4" inlet flange. Burnt spots, but not burnt through. Needs refreshed. Perfect for CAI box
3 Mild steel 2.5" 90* mandrel bent tube. (either 16 or 18 gauge)
Mild steel 2.75" mandrel bent U-bend
Mild Steel smooth 2.5" x 3.5" transition
EGR Valve
Used 660 Gator Back Belt (In great condition)
2 L67 MAP sensor brackets
Aluminum alternator to supercharger bracket
Also, I beleive i have a black alternator to supercharger bracket for a different year car. Unsure if thats actually what this bracket is.
Yea thats about it. I can take pictures of everything. If you are interested in anything please make a post. If its a reasonable price, then youll get it. UPS shipping from 50014. Highest price will be taken if more than one person is interested in an item. I can take pictures of all items. If you have any questions please let me know. Thank you.
