3800 Replacing the Sending unit on a tranny temp

[imported_Diavolo]

I am removing my tranny temp gauge. What size is the bolt I will need to replace the sending unit. Should I just go to ACE? or autozone.

thanks
Mike

Click to read more...

 

[alexgtp]

You are talking about the sending unit that is screwed into the top of the tranny under the TB right? That comes with the autometer gauges.?

If so
a deep socket 10mm with 2 an extension and a swivel will get to the sending unit. Make sure to remove the smaller nut that holds the wires on first that way you dont get all the wires tangled while removing the sending unit from the tranny.

 

[imported_Diavolo]

Yeah that one. What do I replace it with though.

 

[alexgtp]

ATM 2253 (autometer part number)
Sending Unit: Electrical
Sweep: 90 degree sweep
Sending Unit Thread Size: 1/8-27 NPT
Thread Adapter Fittings Included: No
Quantity: Sold individually.
Notes: These senders work only on 1995 and later electric gauges with a full clear lens.


Im pretty sure this is the one.

You can order from JEGS or summit racing about $10.99

 

[imported_Diavolo]

I do'nt think I am being clear.

I am getting rid of my tranny temp gauge. I am taking the sending unit off of my car.

I am assuming I will need a 1/8th inch bolt but how long does it have to be.
I want to return to "stock".

Sorry for being confusing Alex. Thanks for the help so far though.

 

[alexgtp]

Yeah 1/8th bolt from ace would work
take out the sending unit than go to ace and they can find a sutable replacement. make sure it is the correct thread pitch..

 

[imported_Ron Vogel]

1/8" NPT is different, I doubt you will find a bolt to plug. You can however get a pipe plug in that size.

 

[imported_Diavolo]

What is a pipe plug?

 

[CoolGTX]

Originally posted by alexgtp@Mar 23 2005, 09:40 AM
ATM 2253  (autometer part number)
Sending Unit Thread Size: 1/8-27 NPT

[snapback]76486[/snapback]​

B)