3800 Plugs?

[JonPGTP1]

I'm getting my IC installed soon and will prolly need new plugs and wires because mine are stock, haha. Any reccomendations? check the garage for my mod list.

Thanks
-Jon

Click to read more...

 

[mybluegtp]

I would say go with Autolite 103s and the PRJ Wires.

 

[BumpinGTP]

PRJ wires RULE!!!

 

[cacicgtp7]

autolite 104's are working well for me

 

[iliveonnitro]

MSD 8.5mm wires are real nice for the $80...pfyc has them

Personally, I run the Taylor 8mm with nice results.

 

[mybluegtp]

All of them are good but he is getting an IC and the 103s will run good and the wires would be great.

 

[Royalgtp]

I heard PRJs are the way to go for our cars. Although if your lightly modded they say our stock wires are actually pretty good.

 

[sr71_rgl]

Originally posted by JonPGTP1@Dec 28 2003, 03:46 PM
I'm getting my IC installed soon and will prolly need new plugs and wires because mine are stock, haha. Any reccomendations? check the garage for my mod list.

Thanks
-Jon

One of the biggest places people overspend and get jammed by vendors is by purchasing expensive plug wires when they aren't necessary. The ignition system on the L67 doesn't require super large plug wires...even when running high HP. The only benefit of running a larger/more expensive wire on the L67 is if you change plugs ALOT..which most peeps don't do. My suggestion would be to get the autozone wires for $19 (lifetime warranty) and some autolight 103 double plats gapped anywhere between .045 - .055. I just swapped out my 104 coppers for the 103 plats and noticed a smoother idle...even with my lopy assed cam.

 

[ThaLord]

if you go with 103's.. you will most likely foul them out... they are too cold for what you have.... stick with the 104's... or you can try 103's... but expect to change them soon.

 

[JonPGTP1]

I think i'm gonna go with 103's. With my mods i should be able to hit mid 12's and 104's prolly wouldn't be cold enough.