We are very pleased with our shakedown passes with our Chevy SS shop car this past weekend at the Midwest V Shootout! We put our new kit to the test and are very happy with the results from our first outing. On a factory converter leaving on the footbrake we managed to pull off a 10.26 @ 141 pass! That's only with a 1.76 60ft!! Full weight, Stock bottom end, stock converter, with just our custom turbo kit setup, LJMS cam, Billet Specialties drag wheel setup, cutouts and a custom tune from Nick @ Straightline Performance! This kit is 100% streetable and retains the factory heat and AC!
As a result we have decided to run a preorder special! We are offering our first 5 kits at $7299.99 installed!!!
Kits Include:
- Precision 76/75 Turbo
- 3.5 Treadstone Intercooler
- 2 Tial 38mm Wastegates (10psi springs)
- Tial blowoff valve
- GM ZL1 Map Sensor
- GM LS7 MAF sensor
- 2.25 hot side with cast manifolds
- 3" Downpipe (will require modification to mate to the stock exhaust - optional cutout or custom exhaust setup is available)
- 3" inch lower cold side stepped up to a 3.5" upper
- Labor, couplers, clamps, feed and return are also included (will need return bung welded to oil pan)
THIS KIT WILL NEED A FUEL SYSTEM. We wouldn't recommend running this setup without it. Paired with our Fuel System the kit is capable of 800+ rwhp on E85! That's on a mustang dyno!
Call/Email to inquire today!! 847-252-9946