Wow. Amazing fabrication work from this build. Looks like all of it is garage built, too. I spent a half hour reading this thread and he's documenting the build very thoroughly.
Wheel alignment for 4th gen IRS swap - LS1TECH
GM 3.5l 60 degree v6
*Custom Weisco forged pistons $550
*Comp "street/strip" turbo cam $350
*Eagle 327 H-beam rods $450
*ARP 2000 rod-bolts $60
*Childs&Alberts sbc main bearings (Bought two sets for upper bearings) $100
*Coated cam bearings $80
*Manley LS stainless valves w/ Dodge 318 valve-stems $150
*Manley valve keepers and retainers $90
*Head machining and assembly, valve-job and porting $450
*NTR Dry-sump oil-pump, cog-wheel and mandrel $500
*Fidanza aluminum Flywheel $250
*custom oil tank (Aluminum was freebie... welded it myself)
*Crankshaft knife-edging & machining, Custom trigger ring install. Con-rod modification and machining, Block prep and machining, rotation Balance, casting flash removal, Piston coating, block coatings, flywheel balance (etc) $3000
Boost goodies
*Comp Turbo CT3682 "Billet-wheel" Compressor w/ 1.05 AR T3 & P-trim turbine and water-cooled cast aluminum housing $1350
*Dual MV-R watercooled wastegates $500
*Synchronic BOV $250
*Turbo headers (Home made) about $400 worth of 304 stainless mandrel bends, clamps and expansion joints
*Cheap turbo blanket (probably Chinese made) $75
*Frozenboost performance Heat exchanger, w-2-air intercooler and water pump (used) $200
Engine management
*MS3-pro ECU + harness $1200
*6' Delphi 850cc (85lbs) Low-impedence, Fuel injectors $370
*PLX wideband O2 controller $200
*AEM Peak-n-hold driver $250 (ebay)
*misc harness stuff $150
Transmission, Brakes and Suspension
*92 ZR1, dana44 complete rear suspension $1500
*UMI front, Road-race, lower control arms with roto-joints $600 something
*UMI Road-race LS1 K-members $500 something
*BMR trans-cross member (freebie)
*Banski racing fully adjustable toe, camber and trailing arms $1200
*TKO600GM 5-speed tranny $1800
*Lakewood Bellhousing (metric) $100
*Home-made shifter handle (Truck-chrome) $100
*Tremec shifter-ball $40
*CTS-V 6-pot calipers $750
*2010 Camaro SS 2-part, "aluminum hat" brake rotors $500 (got lucky as hell)
2005 ZO6 ABS brake-module $650
misc junk $300
Body control, wheels tires and whatever else comes to mind
*C5 magnesium wheels and "cheapy" tires with meat on em. $800
*ISIS can control system $1500
*Vis Carbonfiber hood (Thats got baked in the f@#king sun while I was away) $750
*Woodward collapsing steer column, detachable hub, Momo steer-wheel $725
*Homemade dash with equess-gauges $250 and some TLC
*Adhesive aluminized reflective heat barrier $150
Wheel alignment for 4th gen IRS swap - LS1TECH
GM 3.5l 60 degree v6
*Custom Weisco forged pistons $550
*Comp "street/strip" turbo cam $350
*Eagle 327 H-beam rods $450
*ARP 2000 rod-bolts $60
*Childs&Alberts sbc main bearings (Bought two sets for upper bearings) $100
*Coated cam bearings $80
*Manley LS stainless valves w/ Dodge 318 valve-stems $150
*Manley valve keepers and retainers $90
*Head machining and assembly, valve-job and porting $450
*NTR Dry-sump oil-pump, cog-wheel and mandrel $500
*Fidanza aluminum Flywheel $250
*custom oil tank (Aluminum was freebie... welded it myself)
*Crankshaft knife-edging & machining, Custom trigger ring install. Con-rod modification and machining, Block prep and machining, rotation Balance, casting flash removal, Piston coating, block coatings, flywheel balance (etc) $3000
Boost goodies
*Comp Turbo CT3682 "Billet-wheel" Compressor w/ 1.05 AR T3 & P-trim turbine and water-cooled cast aluminum housing $1350
*Dual MV-R watercooled wastegates $500
*Synchronic BOV $250
*Turbo headers (Home made) about $400 worth of 304 stainless mandrel bends, clamps and expansion joints
*Cheap turbo blanket (probably Chinese made) $75
*Frozenboost performance Heat exchanger, w-2-air intercooler and water pump (used) $200
Engine management
*MS3-pro ECU + harness $1200
*6' Delphi 850cc (85lbs) Low-impedence, Fuel injectors $370
*PLX wideband O2 controller $200
*AEM Peak-n-hold driver $250 (ebay)
*misc harness stuff $150
Transmission, Brakes and Suspension
*92 ZR1, dana44 complete rear suspension $1500
*UMI front, Road-race, lower control arms with roto-joints $600 something
*UMI Road-race LS1 K-members $500 something
*BMR trans-cross member (freebie)
*Banski racing fully adjustable toe, camber and trailing arms $1200
*TKO600GM 5-speed tranny $1800
*Lakewood Bellhousing (metric) $100
*Home-made shifter handle (Truck-chrome) $100
*Tremec shifter-ball $40
*CTS-V 6-pot calipers $750
*2010 Camaro SS 2-part, "aluminum hat" brake rotors $500 (got lucky as hell)
2005 ZO6 ABS brake-module $650
misc junk $300
Body control, wheels tires and whatever else comes to mind
*C5 magnesium wheels and "cheapy" tires with meat on em. $800
*ISIS can control system $1500
*Vis Carbonfiber hood (Thats got baked in the f@#king sun while I was away) $750
*Woodward collapsing steer column, detachable hub, Momo steer-wheel $725
*Homemade dash with equess-gauges $250 and some TLC
*Adhesive aluminized reflective heat barrier $150