What are you working on today?!

[01bluesnake]

Been trying to get my vibratory tumbler setup working to my liking. Picked up some different media yesterday, already made a big difference in a short time. Ran the cam previously for about 3 hours of light abrasive, then swapped over to polishing stage. Really didnt like the finish. Now i had it in the machine for about an hour and a half and already looks much better. I might try another hour and a half, and see where it sits before using the new polishing stuff. Doing a trans gear also.

 

[camarothatcould]

Assembling

 

[OffshoreDrilling]

FINALLY finished the built in shelves and window box. I need caulk and fill all the nail holes, waiting to do trim and knock it out all at the same time. Slowly been working away at this 20min here, an hour there.

 

[Jimbo]

FINALLY finished the built in shelves and window box. I need caulk and fill all the nail holes, waiting to do trim and knock it out all at the same time. Slowly been working away at this 20min here, an hour there.

View attachment 180594

Damn, me likey.

 

[Bob Kazamakis]

Man that’s cool. Kids are going to be all up in that window when they can climb.

 

[Bob Kazamakis]

Working on my exhaust. Would like to hear this thing sooner rather than later.

 

[sktchy]

Dear GM,

Fuck you.

Sincerely,
Everyone

 

[Jimbo]

Dear GM,

Fuck you.
View attachment 181085
Sincerely,
Everyone

Bruh, get one of these

https://www.amazon.com/dp/B0B5Z254VN/?tag=tcg21-20

 

[sktchy]

Bruh, get one of these

https://www.amazon.com/dp/B0B5Z254VN/?tag=tcg21-20

View attachment 181086
View attachment 181087

Now I feel stupid for not cutting up an empty jug and doin the same thing tcg always finding new ways to make me less dumb.

 

[bikrboy128]

Nothing like a bedazzled claymore coming at your face when you inevitably ram your Nissan Sentra into someone/something

 

[bikrboy128]

How long do you thing this was vibrating/making noise before blowing apart

 

[camarothatcould]

Just noticed a sound yesterday morning leaving to work

 

[sktchy]

Drive it until it don't

 

[camarothatcould]

 

[CMNTMXR57]

Dear GM,

Fuck you.
View attachment 181085
Sincerely,
Everyone

Something similar I had to do with the old RS van (the 2007 for those that don't understand the van generations ). The drain plug would drench the trans cooler mounted right behind it when you pulled the drain plug out... So yea, cut up a gallon jug and used it as a funnel to protect it.

 

[sktchy]

Something similar I had to do with the old RS van (the 2007 for those that don't understand the van generations ). The drain plug would drench the trans cooler mounted right behind it when you pulled the drain plug out... So yea, cut up a gallon jug and used it as a funnel to protect it.

So, I ordered some of those things Jimbo posted since theyre like 10 bucks on eBay. I'm excited to try em out.

Nothin real exciting today just an injector in a ford mf ranger.

 

[sktchy]

I am a big fan of cutting up old jugs but I didn't even stop to think and just let it rip and got out the floor dry

I gave up tryin to be clean it's faster to just make the damn mess and clean it up as you go

 

[sktchy]

Update: ranger was still not happy. Pulled plug and it's covered in oil. Stuck hotter plug in it and it runs great

 

[sktchy]

How much interest do you guys have in this place? I have a friend that's high enough in the food chain to offer to give me a full tour of the plant. Ran over and grabbed his whip this morning to toss a set of tires on for him but it sounds like somethin I can do basically whenever. Tcg wanna go inside blueprint?

 

[OffshoreDrilling]

Dear GM,

Fuck you.
View attachment 181085
Sincerely,
Everyone

Good old GMT900

 

[sktchy]

Good old GMT900

Newer. 2021 4.3 1500. The LTs now use that bullshit torx center plug directly in the bottom of the pan that soaks your hand in hot oil unless you have cat like reflexes

 

[Shawn1112]

How much interest do you guys have in this place? I have a friend that's high enough in the food chain to offer to give me a full tour of the plant. Ran over and grabbed his whip this morning to toss a set of tires on for him but it sounds like somethin I can do basically whenever. Tcg wanna go inside blueprint?
View attachment 182428

Discount on a turn key big block please and thank you

 

[sktchy]

Discount on a turn key big block please and thank you

I mean Im still pretty cool with one of the girls in sales. Idk how far I'd get but I'll sure ask if your serious.

 

[Shawn1112]

I mean Im still pretty cool with one of the girls in sales. Idk how far I'd get but I'll sure ask if your serious.

PM sent

 

[Spivitz]

Right now, #4