Hi All,
I signed up here after finding an epic thread discussing the 4T65E and the 4T80E.
I currently have a F23 manual mated to my SBC (running a 0411 pcm), there is a 1" adapter plate to allow this. I have the car apart for upgrades, and want to switch to an automatic, namely the 4T80E.
I found a source for the transmission, controller, and torque converter, but I am not sure about the flexplate.
The transmission guys I talked to said the adapter plate would influence the flexplate, and I've had my current setup for so long I don't remember what size the flywheel is or the toothcount (I reached out to the guy who last did some major work on my car to see if he remembers - I figured this info would be useful).
It'll be a rear-wheel setup. I want to make sure I can solve for the flexplate before I spend all the money on the other components, (or face selling them at a loss). Even if there's information I can't get until I have the transmission, as long as I know there is a person/shop that can make the flexplate once I have that info, I'll start buying the components.
Any thoughts/suggestions?
I signed up here after finding an epic thread discussing the 4T65E and the 4T80E.
I currently have a F23 manual mated to my SBC (running a 0411 pcm), there is a 1" adapter plate to allow this. I have the car apart for upgrades, and want to switch to an automatic, namely the 4T80E.
I found a source for the transmission, controller, and torque converter, but I am not sure about the flexplate.
The transmission guys I talked to said the adapter plate would influence the flexplate, and I've had my current setup for so long I don't remember what size the flywheel is or the toothcount (I reached out to the guy who last did some major work on my car to see if he remembers - I figured this info would be useful).
It'll be a rear-wheel setup. I want to make sure I can solve for the flexplate before I spend all the money on the other components, (or face selling them at a loss). Even if there's information I can't get until I have the transmission, as long as I know there is a person/shop that can make the flexplate once I have that info, I'll start buying the components.
Any thoughts/suggestions?