Think they'll hold?

OffshoreDrilling

This is my safe space
TCG Sponsor
TCG Premium
HVAC Guy
Aug 28, 2007
39,147
50,295
Homer Glen
My new rods came in today. I should be able to toss a little nitrous at them. :jerkit:

Scat 5.7 H beam small journal connecting rods.
11t3a10.jpg
 

OffshoreDrilling

This is my safe space
TCG Sponsor
TCG Premium
HVAC Guy
Aug 28, 2007
39,147
50,295
Homer Glen
Im not going to spray at all until I get a transmission built up, which may be the fall or even next year. The rods are good for 700hp,

My build list is looking like this as of now:
-Stock block, just cleaned up and honed
-Stock crank, polished the journals, will be balanced
-Scat H beam rods w/ ARP bolts ( the big end needs to be narrowed to fit on my crank)
-JE forged 11:1 pistons in stock bore
-Custom crank scraper
-Clevite 77 rod, main, and cam bearings
-Custom ground cam 231/234duration 111 lsa .606 int .563 exh.
-Custom chrome moly pushrods
-ARP head studs
-Ported 3500 heads
-Comp cams 26916 valve springs w/ comp valve locks and retainers
-Ported 3500 lower intake
-Ported 3500 upper intake
-Phenolic plenum spacers
-Custom made TB spacer with a port for nitrous nozzle
-Billet 65mm TB
-MP racing CAI
-36lb injectors
-ZZP fuel pump reqwire
-Dynotune wet nitrous kit w/ TPS activated 2 stage window switch
-S&S Ceramic coated headers
-Downpipe w/ high flow cat
-SLP catback
-Innovate wideband
-Tuned by myself w/ DHP powertuner
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info