Hey TCG. i finally got my pics up of the suspension swap. this was something that should have been done right from the start. this is how the car should have handled from the factory. well on to the pics. lets hear some feedback, good or bad, let me know what you think.
*up on stands*
*factory set-up*
*BFH persuassion*
*half way disassembled on one side*
*to be dismantled, reusing springs*
*tubular trailing arm comparision: BMR arm to Stock*
*one strut apart, 3 to go*
*new strut done*
*lateral arm comparision: BMR to Stock*
*dropped rear crossmember to access lateral arm bolts*
*all three arms installed*
*rear swaybar being finessed in*
*strut installed*
*endlinks installed*
*half done with rear*
*rear done*
*completed close-up*
*front stock*
*heating up some bolts*
*strut out to swap springs*
*new bearings, GMPP swaybar, and 2003 LCA's installed*
*TPR endlinks installed*
*front struts back from NAPA, now installed*
*front now completed*
BIG thanks to my friend Greg. he did the install for me.
*up on stands*
*factory set-up*
*BFH persuassion*
*half way disassembled on one side*
*to be dismantled, reusing springs*
*tubular trailing arm comparision: BMR arm to Stock*
*one strut apart, 3 to go*
*new strut done*
*lateral arm comparision: BMR to Stock*
*dropped rear crossmember to access lateral arm bolts*
*all three arms installed*
*rear swaybar being finessed in*
*strut installed*
*endlinks installed*
*half done with rear*
*rear done*
*completed close-up*
*front stock*
*heating up some bolts*
*strut out to swap springs*
*new bearings, GMPP swaybar, and 2003 LCA's installed*
*TPR endlinks installed*
*front struts back from NAPA, now installed*
*front now completed*
BIG thanks to my friend Greg. he did the install for me.